259078-1-M-GE-WD12X10061 -Fine Filter Hub Nut
Part Location Diagram of WD12X10061 GE Fine Filter Hub Nut
See part 454 in the diagram
259078-1-S-GE-WD12X10061 -Fine Filter Hub Nut 360 view
( Grid squares measure 1x1 inch )
259078-1-S-GE-WD12X10061 -Fine Filter Hub Nut 259078-2-S-GE-WD12X10061 -Fine Filter Hub Nut 259078-3-S-GE-WD12X10061 -Fine Filter Hub Nut 259078-1-S-GE-WD12X10061 -Fine Filter Hub Nut 360 view
Part Location Diagram of WD12X10061 GE Fine Filter Hub Nut

Fine Filter Hub Nut WD12X10061

$ 16.61
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX259078
Manufacturer #:
WD12X10061
Manufactured by:
GE

Product Description

This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub nut, and it connects the lower spray arm to the hub. If the hub nut breaks, it can cause the spray arm to wobble during operation and this can result in a strange noise. To replace this part, first remove the spray arm by turning it counter clockwise, then do the same with the hub nut. Install the new hub nut by turning it counter clockwise, then replace the lower spray arm. This part is sold individually and is an OEM part from the manufacturer.

  • Works with the following brands:
    General Electric, Hotpoint
  • Works with the following products:
    Dishwasher
  • Fixes the following symptoms:
    Not cleaning dishes properly, Noisy, Leaking, Not draining
  • Part# WD12X10061 replaces these:
    AP3186474, 943416