This part strips the ice from the icemaker mold during the ejection cycle. Used on rear mount icemakers.
Works with the following brands:
General Electric, Hotpoint
Works with the following products:
Refrigerator
Fixes the following symptoms:
Ice maker not making ice, Ice maker won’t dispense ice
Part# WR29X10085 replaces these:
AP4413586, 1477633, WR29X10085, WR02X11548
Works with the following brands:
General Electric, Hotpoint
Works with the following products
Refrigerator
Fixes the following symptoms
Ice maker not making ice, Ice maker won’t dispense ice
Part Number Cross Reference
Part# WR29X10085 replaces these:
AP4413586, 1477633, WR29X10085, WR02X11548
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
August 18, 2022
No water going into ice maker so no ice is being made but water coming out of water dispenser
For model number PSS26MSWASs
Hello Linda, thank you for reaching out to us. Usually, when there is no ice or water, it indicates two problems: either the water inlet valve is damaged, or frozen water. For the first, it is recommended to replace the water inlet valve (part number FIX1483564) and for the latter look into the water supply tube just above the ice maker to make sure there is no ice clogged in it. If there is, turn off the refrigerator and let the heat melt it. We hope you will find this helpful. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for your question!
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 4.1 / 5.0, 3 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The stripper arm had broken leaving pieces of it in the ice bin
My son-in-law helped me. He put the end on first that went over the pin and then slid the other end into the slot. We had read the other repair hints and noted that people said they had to make adjustments to their new stripper arm. When looking at our old one compared to the new one we noticed that there was as little notch (corner cut
... Read moreout) at the top of the end that slides into the slot on the left end. When I didn't have any ice, I started to investigate and discovered that yes the tines were not lining up and although ice was made it could not be pushed up and out of the ice mold. So, he took out the part and cut the notch in it like the old one had using his pocket knife, and reinstalled it. Everything lined up and it works great now!
Simply pulled off the old stripper arm that had a broken flipper, it has a slat on one end and a notch on the other. Insert the slat into the groove and then the notch into the hole. BINGO. Had ice quite soon.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.