Clear Belt 6-9021150
Works With Model WC300!
$63.19
In Stock
- Fix Number:
- FIX2347264
- Manufacturer #:
- 6-9021150
- Manufactured by:
- Whirlpool
Works With Model WC300!
Jump to:
Product Description
The parts specs are: 25 3/8" long and 1/4" wide.
-
Works with the following brands:Maytag, Jenn-Air, Kenmore
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Not draining, Noisy, Not cleaning dishes properly, Will Not Start
-
Part# 6-9021150 replaces these:AP4372892, 1480357, 7-57073, 757073, 8195-115, 9-11197 ... Show more , 9-2115, 902115, 911197, P46-158, Y757073 Show less
- Works with the following brands:
- Maytag, Jenn-Air, Kenmore
- Works with the following products
- Dishwasher
- Fixes the following symptoms
- Not draining, Noisy, Not cleaning dishes properly, Will Not Start
- Part# 6-9021150 replaces these:
- AP4372892, 1480357, 7-57073, 757073, 8195-115, 9-11197, 9-2115, 902115, 911197, P46-158, Y757073
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- joseph from longmont, CO
- Parts Used:
- 6-9021150
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Badly worn noisy almost broken clear belt
Removed the lower 2 cabinet covers each having only 2 5/16 sheet metal screws with a nut driver. Vacuumed under the machine to remove dust balls. Yuk! Removed the overly stretched old belt very easily with my fingers. Followed the enclosed instructions with 2 modifications. 1. I soaked the belt in hot tap water for about 5 minutes to try
... Read more
to soften it up a bit. I think this helped. 2. I then, per instructions, "stretched" the belt around the back side of the pump (larger) pulley after starting it around the motor pulley first. "Stretch" means I used a medium screwdriver with the blade end slipped into the loop made by the belt just as it was about to wrap around the pulley. I found I couldn't do this at all with my fingers or any other method suggested by others. I then could pull both the upper and lower ends of the screwdriver like it was a handle and somewhat easily have the leverage to overcome the stiffness of the belt and get around the pulley. I didn't have to contort my body to do this. My idea came from thinking of those car tire installation machines. I did use the silicone liberally on the belt as instructed after putting the belt on. Reassembly was a breeze.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Kersey, PA
- Parts Used:
- 6-9021150
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Install belt
1. Remove front panel. 2. Place belt on motor pulley. 3 Place coat hanger hook over belt and align belt with driven pulley. 4. Pull belt and hook around pulley. 5. remove hook.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from nathrop, CO
- Parts Used:
- 6-9021150
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken belt
New belt needed to be "stretched" some: I put it in the oven at about 140 degrees for about ten minutes: Belt went on extremely easy. Note: check belt in oven every minute or so by taking it out and check it for "stretch". Install immediately after achieving some stretch as belt will tend to shrink back to its original size.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Newbern, TN
- Parts Used:
- 6-9021150
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Pump belt broke.
Replace belt, only problem was the new belt being so tight was hard to install.Finally got it.The washer runs fine now except on the last cycle water remains in tub, then dry cycle has hot steam and dishes don't dry. When starting New cycle water has to empty first. Any suggestions on that.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX2347264
Manufacturer Part Number: 6-9021150
Manufacturer Part Number: 6-9021150
| Brand | Model Number | Description |
|---|---|---|
| Kenmore | 19495 | Dishwasher - Kenmore Dishwasher Model 19495(1988) Parts |
| Kenmore | 19595 | Dishwasher - Kenmore Dishwasher Model 19595(1988) Parts |
| Kenmore | 19885 | Dishwasher - Kenmore Dishwasher Model 19885(1988) Parts |
| Kenmore | 19995 | Dishwasher - Kenmore Dishwasher Model 19995(1988) Parts |
| Jenn-Air | DP450 | Dishwasher |
| Jenn-Air | DP450-C | Dishwasher |
| Jenn-Air | DP451 | Dishwasher |
| Jenn-Air | DP470 | Dishwasher |
| Jenn-Air | DP471 | Dishwasher |
| Jenn-Air | DP476 | Dishwasher |
| Jenn-Air | DU401 | Dishwasher |
| Jenn-Air | DU450 | Dishwasher |
| Jenn-Air | DU450-C | Dishwasher |
| Jenn-Air | DU451 | Dishwasher |
| Jenn-Air | DU470 | Dishwasher |
| Jenn-Air | DU470-C | Dishwasher |
| Jenn-Air | DU471 | Dishwasher |
| Jenn-Air | DU476 | Dishwasher |
| Jenn-Air | DU490 | Dishwasher |
| Jenn-Air | DU490-C | Dishwasher |
| Jenn-Air | DU491 | Dishwasher |
| Jenn-Air | DU496 | Dishwasher |
| Jenn-Air | DU588 | Dishwasher |
| Jenn-Air | DU588W | Dishwasher |
| Maytag | LWC202 | Dishwasher - MAYTAG DISHWASHER |
| Maytag | WC201 | Dishwasher |
| Maytag | WC202 | Dishwasher |
| Maytag | WC282 | Dishwasher |
| Maytag | WC300 | Dishwasher |
| Maytag | WC301 | Dishwasher |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.