Part Location Diagram of 921-04034 Husky SEAL-OIL
See part F-73 in the diagram

SEAL-OIL 921-04034

$13.26
Special Order
Fix Number:
FIX19301950
Manufacturer #:
921-04034
Manufactured by:
Husky

Product Description

This is a genuine OEM sourced hardware that is specially made for MTD and Troy-Bilt tillers. It is utilized to provide a tight seal on the eccentric shaft, unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality seal is made of durable rubber material and is sold individually. Please make sure to check the diagrams of your model for the exact location of this component.

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
January 29, 2022
what is best way to remove & replace oil seal on eccentric shaft assembly. oil seal part # 92104034.
For model number 21A-664D063
Fix.com logo
Hello Bob, Thank you for your inquiry. We have found the follow repair instructions for you. First, put the tiller in the fast gear setting. This will keep it from moving and give more access to the squeeze pin. Tilt the tiller forward so you have more room and can get to the eccentric shaft a little easier. Tap out the squeeze pin on the linkage that connects the speed selector to the shaft, then slide the shifter off of the shaft. Use a small screwdriver to remove the old seal and clean any excess dirt and debris from the parts. Put the new seal in making sure it is pushed in as much as possible, you can use a hammer and punch or screwdriver to tap the seal in. Put the shifter back on the shaft making sure it is in the same position as when it was removed and drive the squeeze pin back in, then reconnect the linkage for the shifter. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!

Model Compatibility

This part works with the following models:
Fix Number: FIX19301950
Manufacturer Part Number: 921-04034
Brand Model Number Description
Troy-Bilt 0360 Tiller - Horse-Silver Anniversary(8hp) Tiller
Troy-Bilt 10056 Tiller - Horse Iii
Troy-Bilt 1173135 Tiller - 1173135 - Tillers Brushcutters And Pruners
Troy-Bilt 1173385 Tiller - 1173385 - Tillers Brushcutters And Pruners
Troy-Bilt 12055 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12056 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12057 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12059 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12062 Tiller - Pony Opc (5hp)
Troy-Bilt 12064 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12066 Tiller - Pony Opc (5hp)
Troy-Bilt 12068 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12069 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12070 Tiller - Roto Tiller Power Composter
Troy-Bilt 12071 Tiller - PTO Horse Tiller
Troy-Bilt 12074 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12075 Tiller - Horse Tiller
Troy-Bilt 12080 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12081 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12082 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12083 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12086 Tiller - Econo-Horse(6hp)
Troy-Bilt 12087 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12087C Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12088 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12088C Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12089C Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12090C Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12153 Tiller - Horse-Opc Rototiller
Troy-Bilt 12164 Tiller - (1100101-1199999) Pony Tiller