This heating element mounting nut is used in dishwashers and is used to hold the nut to prevent leaking. If your nut is damaged or you notice leaking from the dishwasher, then replacing this nut will solve this problem. The tools needed for this repair are a 1/2 inch wrench, 1/4 inch nut driver, and needle nose pliers. To repair, locate the two element heating nuts. Next, disconnect connecter wire and remove nut with wrench. Tip: when installing new nut, remember to add insulator sleeve back on. As a safety precaution, remember to disconnect the water supply line before beginning this installation. Also, unplug your dishwasher from the power source.
-
Works with the following brands:
Frigidaire, Kenmore, Crosley, Gibson
-
Works with the following products:
Dishwasher, Refrigerator
-
Fixes the following symptoms:
Leaking, Not drying dishes properly
-
Part# 154106202 replaces these:
AP3965251, 1196115, 08014807, 1093360, 148621, 154106201
...
Show more
, 159895A, 3018118, 3351029, 40571, 5300806834, 5303351029, 8-6834, 80-6834, 8014807, 806834, 89637-1, 896371, S000007201, WS7201
Show less
- Works with the following brands:
- Frigidaire, Kenmore, Crosley, Gibson
- Works with the following products
-
Dishwasher, Refrigerator
- Fixes the following symptoms
- Leaking, Not drying dishes properly
Part Number Cross Reference
- Part# 154106202 replaces these:
-
AP3965251, 1196115, 08014807, 1093360, 148621, 154106201, 159895A, 3018118, 3351029, 40571, 5300806834, 5303351029, 8-6834, 80-6834, 8014807, 806834, 89637-1, 896371, S000007201, WS7201