Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Dial with Compression Ring
Works With Model GCAP1800D1WW!
$14.29
In Stock
- Fix Number:
- FIX1482363
- Manufacturer #:
- WH11X10049
- Manufactured by:
- GE
Works With Model GCAP1800D1WW!
- Product Description
- This timer dial with compression ring is a genuine OEM part for your washer. The dial is made of plastic and is white in color. It can be found on the timer shaft underneath the timer knob, and it features an arrow to indicate how far along your laundry is in the wash cycle. If your timer dial has become cracked or damaged, it should be replaced. Please note that this part is different and sold separately from the timer knob.
- Works with the following brands:
- General Electric
- Works with the following products
- Washer
- Fixes the following symptoms
- Will Not Start, Touchpad does not respond
- Part# WH11X10049 replaces these:
- AP3995255, 1264479
Part Number Cross Reference
Product Description
This timer dial with compression ring is a genuine OEM part for your washer. The dial is made of plastic and is white in color. It can be found on the timer shaft underneath the timer knob, and it features an arrow to indicate how far along your laundry is in the wash cycle. If your timer dial has become cracked or damaged, it should be replaced. Please note that this part is different and sold separately from the timer knob.
-
Works with the following brands:General Electric
-
Works with the following products:Washer
-
Fixes the following symptoms:Will Not Start, Touchpad does not respond
-
Part# WH11X10049 replaces these:AP3995255, 1264479
Videos For installing this part.
Replacing your Dial with Compression Ring
![Replacing your Dial with Compression Ring Replacing your Dial with Compression Ring](https://img.youtube.com/vi/w3isHhOutMA/maxresdefault.jpg)
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Peter from CLIFTON, NJ
- Parts Used:
- WH11X10049, WH01X10310, WH1X2117
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Knob replacement
Unplugged washer. Using needle nose pliers removed old knobs and installed new ones. Your how to video was helpful.
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Burlington, KY
- Parts Used:
- WH11X10049
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Wrench set
Spins slowly
Replaced the belt. Did not fix. Replaced the fuse link. Did not fix. Replaced the lid switch. Did not fix. Went to Lows with one tool, MasterCard, and fix the problem by buying a new washing machine. Took 1/2 hour...
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from Tuscola, IL
- Parts Used:
- WH11X10049, WH01X10310
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Push-pull knob on timer will not turn timer
After finding like model on line used pictures of parts on partselect.com to confirm parts needed and then ordered. On arrival in two days, removed old timer knob using pliers to remove clip, removed dial (with compression ring). Installed new dial and pushed on new timer knob (DON'T remove clip and try to install later) with clip in pl
... Read more
ace. Clip will fall into place when installed. It took longer to find out which model family the washer was than anything.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JACKIE from LAS VEGAS, NV
- Parts Used:
- WH11X10049, WH01X10310
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
THE COMPRESSION RING BROKE
I DID EXACTLY WHAT I WAS INSTRUCTED TO DO ON THE SITE "YOU TUBE" VIDEO. WOW--IT WAS TOO EASY--THANKS
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Trisha from Alma, NE
- Parts Used:
- WH11X10049, WH01X10310, WH02X10093, WH1X2721, WH1X2117
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Knob Stripped Out - Broke
Watched install video - snapped it on - problem fixed.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Malakoff, TX
- Parts Used:
- WH11X10049, WH01X10310, WH1X2117
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Timer knob teeth worn off.could not select wash cycle.
First the exploded view provided in your website helped greatly I could see exactly what parts were involved. UPLUG WASHER ! 3 screws removed from back of control panel removed and the panel comes forward (hint..slide to right and it will detach from base making access easier) Pull knob out giving more room to remove plastic clip and
... Read more
knob comes off. 1 screw that holds timer in place removed and unplug the wiring harness. Reassemble using new parts in same manor as disassembly. Hint for putting clip on back of knob..place the clip partially on back of knob in the slot, put knob on shaft then using needle nose push the clip in place. Identifying and ordering parts here was a snap and saved me a bunch of money by not having to call a repair service. Thanks
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Orren from Brick, NJ
- Parts Used:
- WH11X10049, WH01X10310, WH1X2117
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Timer would not advance on any cycle.
I removed the timer knob clip with needle nosed pliers. Then I took the timer knob and compression ring off of their shaft. With a clean cloth and some 409,I cleaned the area behind where the knob and ring came from.I replaced all of the parts and tested the machine. It worked properly on all cycles. Until I found your site,I was prepared
... Read more
to spend over $700.00 on a new washer,but thankfully your instructions helped me save some money. Thank you: O.Smith
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nathan from Prairieville, LA
- Parts Used:
- WH11X10049, WH01X10310, WH1X2117
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The washer knob was not engaging the timer when turned.
To remove the knob there is a small plastic clip holding it on. I pulled the knob out as far as it would normally go. Then I leaned over to look behind the knob and locate the clip. I used a small flat head screwdriver to push the clip off of the knob. I then pulled off the knob and dial compression ring. Inserted new compression ring fir
... Read more
st, then the knob. Installed new clip, being sure it secured the knob. That was all, very easy. The problem was cause by the plastic teeth on the knob had all broken off. This kept the knob from engaging the timer, and it would always spin freely.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joe from toms river, NJ
- Parts Used:
- WH12X10350, WH11X10049, WH01X10310, WH1X2117
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
dial knob and timer gear stripped
Pulled washer away from wall, removed 2 screws, slide front panel to the right and lift up. Unclip both wire harnesses and remove screw, twist timer housing left and remove. Install new timer, and plug harnesses in, replace the front panel, after panel installed then install new dial knob and insert clip.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LOUIS from CORPUS CHRISTI, TX
- Parts Used:
- WH11X10049, WH01X10310, WH1X2117
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
free wheeling timer knob
removed old timer knob clip by pushing out with small flat blade screw driver, gently used screw driver to pry stuck knob from timer stem, pulled out old dial indicator, . lubricated timer stem, inserted new dial indicator aligning with slot on timer stem, inserted new knob, inserted new timer knob clip and pushed in to lock with screw dr
... Read more
iver
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1482363
Manufacturer Part Number: WH11X10049
Manufacturer Part Number: WH11X10049
Brand
Model Number
Description
✖
Mail-In Recycling Rebate