Pri; Protector, Circuit (20a) 38240-Z11-A32

Hi Ken, thank you for your question! If your generator is flashing a red overload light and there is nothing plugged in, this is generally due to running it without load for too long. It commonly happens when you are running out of fuel. An overload indicator may flash when you are starting a device with a large startup current. This indicates that the generator is supplying your machine with more than its rated wattage (for a few seconds), and it is quite normal. If this is not the issue, you will need to replace the control panel, part number FIX12133994. We hope this helps, good luck with this repair!