Door Latch

1. Turn off power at the breaker box 2. Remove all 14 screws on the inside of door with hex screwdriver. 3. Remove plastic cover over latch and circuit board. 4. Remove electrical connections -- there are two but remember which plugged into which location. 5. Pop out old latch and replace with new latch. 6. Plug in connectors (ste ... Read more p 4). 7. Replace plastic cover. 8. Reattach inside door -- can be tricky to get back in alignment but once you get the first screw in, it gets easier. 9. Switch power back on and done. Overall it took me 5 minutes longer because I forgot to do step 7 and after aligning the door, successfully getting two screws in, I saw the plastic cover on the counter.