Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Bake Element
Works With Model GMC275PDQ07!
$70.38
In Stock
- Fix Number:
- FIX11750369
- Manufacturer #:
- WPW10207397
- Manufactured by:
- Whirlpool
Works With Model GMC275PDQ07!
- Product Description
- The bake element is located in the bottom of the oven and is used to heat the oven for cooking and baking. If the element is not heating up, providing little or inconsistent heat, or is getting too hot, the bake element may need to be replaced. The element can be tested with a multimeter to determine if it is defective. If it needs to be replaced, this is a genuine OEM bake element with push-on terminals. Please be sure to disconnect the power supply to your range before you begin this repair.
- Works with the following brands:
- Whirlpool, Maytag, KitchenAid
- Works with the following products
- Wall Oven, Microwave Oven Combo, Range
- Fixes the following symptoms
- Little to no heat when baking, Element will not heat, Oven not heating evenly
- Part# WPW10207397 replaces these:
- AP6017074, 4448696, 4452153, 9760766, W10207397
Part Number Cross Reference
Product Description
The bake element is located in the bottom of the oven and is used to heat the oven for cooking and baking. If the element is not heating up, providing little or inconsistent heat, or is getting too hot, the bake element may need to be replaced. The element can be tested with a multimeter to determine if it is defective. If it needs to be replaced, this is a genuine OEM bake element with push-on terminals. Please be sure to disconnect the power supply to your range before you begin this repair.
-
Works with the following brands:Whirlpool, Maytag, KitchenAid
-
Works with the following products:Wall Oven, Microwave Oven Combo, Range
-
Fixes the following symptoms:Little to no heat when baking, Element will not heat, Oven not heating evenly
-
Part# WPW10207397 replaces these:AP6017074, 4448696, 4452153, 9760766, W10207397
Videos For installing this part.
Replacing your Bake Element
![Replacing your Bake Element Replacing your Bake Element](https://img.youtube.com/vi/paa4ZX6VFT0/maxresdefault.jpg)
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Scott from Fayetteville, GA
- Parts Used:
- WPW10207397
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Baking Element Arching
First I don't know why all the other directions omitted the most important step. REMOVE POWER AT CIRCUIT BREAKER BOX. Unless you want to risk 240 volts surging through your body I would strongly suggest this step not to be skipped. Leave breakers off to avoid accidental oven use by forgetful wife. Second, with power removed and oven al
... Read more
lowed to cool, pull oven trays out. At the bottom of the oven there are two screws attaching the element to the the back of the oven. Using a #2 Philips Head screwdriver remove the two screws. Gently pull the element out. The element is attached to two push-on wires. Gently pull the connectors off element. Remove element. Re-install two screws in attachment holes to not lose screws. Wait for about a week to receive part. Once part arrives removed saved screws. Reinstall the push on connectors of the power wires onto the element. Feed the wires gently back into the back of the oven. Align screw holes of the element attach plate and re-attach the two screws. Close oven door. Reset circuit breakers at the panel. Reset time on oven. Call wife to brag on how you saved her thousands of dollars on a new oven. This took more time to write than the job itself. But really remember to shut off the power.
Read less
11 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Fort Worth, TX
- Parts Used:
- WPW10207397
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
lower heating element went out
Turn off the breaker in our electrical panel first ! Removed two mounting screws and unpluged the the element and removed it. Then I plugged in the new element and replaced the mounting screws and tested ,works perfectly now wife is happy again !
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roger from Gloucester, VA
- Parts Used:
- WPW10207397
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Heat Element was Broken
Removed two screws with phillips screwdriver. Then removed two wires that connected to heat element then do the reverse. Was finished in 10 minutes.
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ron from Pflugerville, TX
- Parts Used:
- WPW10207397
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Bake element failed and contacted bottom of oven
Shut off breaker to the oven. Removed two screws which attach the element to the back of the oven. Moved element slowly toward the front of the oven until I could slid the two connectors off the element. Attached the connectors to the new element. Carefully pushed the element with the wires connected back in place. Installed two scre
... Read more
ws. Closed oven breaker and used a thermometer to check temperature accuracy after the oven heated up. Spent more time cleaning the oven when the element was removed than it took to replace the element.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael J. from Trumbull, CT
- Parts Used:
- WPW10207397
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
The heat element burned out
This would have been a very easy job had the screws not been rusted. When I attempted to remove the old screws the head of the screw completely disintegrated. I sprayed it with a lubricant and let it sit overnight then used a pair of vice grips to grab what was left of the screw. Once the screws were removed the rest was an easy job. I ha
... Read more
ve one issue, the replacement element did not come with screws. Make sure to order screws with your replacement part or have some on hand to complete your job.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donnamarie from Pinckney, MI
- Parts Used:
- WPW10207397, WP4449259
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Broken inner window on door and broken heating element
I watched a Youtube video to see how to fix my oven. So happy to see the site had my pieces. I am NOT a handyperson but decided to try it. My son-in-law located the hinge locks and easily pulled those forward. The door lifted out quite easily. I unscrewed all the screws in the door and carefully lifted each part as it came loose. After so
... Read more
many years, the parts were very greasy and dirty. I lifted out the broken glass and disposed of it and, one by one, I just scrubbed all the parts clean. I carefully reassembled the pieces and replaced all the screws. The heating element was a very easy fix. I turned off the power, removed 2 screws that held it to the back wall of oven, pulled the connector wires apart carefully, disposed of old unit, connected new unit like the other one was, replaced screws and "voila!" done.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Stacey P - September 9, 2021
Verified Purchase
Fit exactly
The part was exactly as described and very easy to install. It took 15 minutes or less. The video was very helpful.
Model Compatibility
This part works with the following models:
Fix Number: FIX11750369
Manufacturer Part Number: WPW10207397
Manufacturer Part Number: WPW10207397
Brand
Model Number
Description
✖
Mail-In Recycling Rebate