Part Location Diagram of WPW10111435 Whirlpool Front Load Washer Bellow - Gray
See part 1 in the diagram
Replacing your Kenmore Washer Front Load Washer Bellow - Gray
( Grid squares measure 1x1 inch )

Front Load Washer Bellow - Gray WPW10111435

Works With Model WFW8300SW1!
★★★★★
★★★★★
1 Review

Rated by 13 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$102.95
In Stock
Fix Number:
FIX11748353
Manufacturer #:
WPW10111435
Manufactured by:
Whirlpool
Works With Model WFW8300SW1!

Product Description

Also known as a door boot seal.This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.

Videos For installing this part.

Replacing your Front Load Washer Bellow - Gray

Replacing your Front Load Washer Bellow - Gray

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.9 / 5.0, 13 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
James from Springfield, VA
Parts Used:
WPW10111435
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Water leaking at bottom of door
Baught new seal went to look at old one to make sure drain hole lined up and found ring with 2 keys, quarter,penny and a golf ball marker. I removed them and no more leak!
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Danville, CA
Parts Used:
WPW10111435
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Dirty bellow with strong, unpleasant odor
Replaced with new bellow following instructions on YouTube video. Following directions, disassembly was very easy. Only tricky part of re-assembly was installation of final retainer ring, but using 2 screw drivers, I was able to get it around the bellows and into the groove. No leaks and no more smell!
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Rochester Hills, MI
Parts Used:
WPW10111435
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Washer was leaking out of the front. bellows had a tear in it
Using soap to lubricate the inner seal made that procedure go smoothly. I found it easier to use needlenose pliers to reattach the spring holder to the door assembly than using a screw driver.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
wayne from middletown, RI
Parts Used:
WPW10111435
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
The spring the hold the top gets little jam but works
Follow the instructions from the video and will get it done
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roy from Gilroy, CA
Parts Used:
W11032829, WPW10111435
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
The bellows was hard to get around the drum
My problem was really shipping. The clamp came flat in a box inside a larger box. The bellows came in a very small box all twisted so it would fit. I had to put the bellows in the dryer to warm it up to get all the kinks out of it. Even at that it wanted to curl up to the shape it was in the box. Also the spring on the front clamp wa s so tight I could not get it to stretch over the drum so I used the old one. Working well now.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Cumming, GA
Parts Used:
W11032829, WPW10111435, WP8540108
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
The washer was leaking at the bottom of the door.
I figured out that the bellows needed replacing. I followed the instructional video supplied by this site. It was easy to take the washer apart along with the bellows but I had a HELL of a time getting the thing back on. It took some tweaking and patience but I got it on there nice a secure. Don't forget to put a little dish washing liqui d around the rim where the bellows goes. It made the job a little easier. All in all I saved a couple hundred bucks doing it myself,
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Corona, CA
Parts Used:
WPW10111435
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Washer leaking at bottom of door bellows
Followed the online video associated with the part. Had ONE minor exception. Whirlpool added a screw inserted up from the bottom center of the control panel that did not show in the video. It requires a Phillips screwdriver to remove it so the control panel will tilt out at the bottom. Rest of the video shows the process well, the bell ows was floppy and hard to align, but once it was lined up at the critical bottom it went in easily. Replacing the control panel needed a bit of fiddling to get the screw tab inside the bottom of the panel into the right place to replace the 'extra' screw. Washer no longer leaks, and this saved me a ton of money!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
daniel from alto, MI
Parts Used:
WPW10111435
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
the video made it look very easy to install the bellows but i couldn't install like it discribed
i called a service company
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathleen M from Lynnwood, WA
Parts Used:
WPW10111435, 4930JJ2021A
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Replacing a rubber gasket on a front loader washer/ Kenmore made by LG
You tube will be your best bet for assistance!! This replacement went very well with the assistance of You Tube - make certain you have correct model for replacement instructions however - each MFR model will have slightly different componentry in the steps required , which is significant! It probably took my husband a little longer bec ause this is something we typically do not do, we did have all the required tools which helps as well!!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Megan from Natrona Heights, PA
Parts Used:
WPW10111435
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Our bellow was torn
Took off the three front plates, removed the retaining wire, disconnected the bellow from the front of the washer, removed the detergent hose, pushed the bellow to the inside of the washer and removed the inner retaining wire, disconnected the old bellow and set it aside, cleaned out the area where the new bellow would be seated, seated t he new bellow on the inside and replaced the retaining wire, replaced detergent hose, fit bellow on the outside of the washer and replaced the retaining wire, ensured that the new bellow was seated and sturdy, replaced the three front panels... Done!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11748353
Manufacturer Part Number: WPW10111435
Brand Model Number Description
Kenmore 11046462500 Washer
Kenmore 11046462501 Washer
Kenmore 11046472500 Washer
Kenmore 11046472501 Washer
Kenmore 11047511700 Washer
Kenmore 11047511701 Washer
Kenmore 11047511702 Washer
Kenmore 11047512600 Washer
Kenmore 11047512601 Washer
Kenmore 11047512602 Washer
Kenmore 11047512603 Washer
Kenmore 11047512604 Washer
Kenmore 11047512605 Washer
Kenmore 11047531700 Washer
Kenmore 11047531701 Washer
Kenmore 11047531702 Washer
Kenmore 11047532600 Washer
Kenmore 11047532601 Washer
Kenmore 11047532602 Washer
Kenmore 11047532603 Washer
Kenmore 11047532604 Washer
Kenmore 11047532605 Washer
Kenmore 11047542600 Washer
Kenmore 11047542601 Washer
Kenmore 11047542602 Washer
Kenmore 11047542603 Washer
Kenmore 11047542604 Washer
Kenmore 11047542605 Washer
Kenmore 11047561600 Washer
Kenmore 11047561601 Washer