Part Location Diagram of WPW10082832 Whirlpool Holder
See part 5 in the diagram
Replacing your Maytag Dishwasher Holder
( Grid squares measure 1x1 inch )

Holder

Works With Model MDB8959SBS1!
$ 8.55
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX11748183
Manufacturer #:
WPW10082832
Manufactured by:
Whirlpool
Works With Model MDB8959SBS1!

Product Description

The holder is commonly referred to as a center wash arm support, holds the center washing arm of your dishwasher in place. This plastic holder is approximately 5 inches long by 4 inches wide, and should fit snug on the spray arm to allow it to clean the dishes properly. If your dishes are not being thoroughly, or evenly cleaned, the holder may be loose and the wash arm will be unable to function properly.