11744360-1-M-Whirlpool-WP74009958-Surface Ignitor
Part Location Diagram of WP74009958 Whirlpool Surface Ignitor
See part 5 in the diagram
( Grid squares measure 1x1 inch )
11744360-1-S-Whirlpool-WP74009958-Surface Ignitor 11744360-2-S-Whirlpool-WP74009958-Surface Ignitor Part Location Diagram of WP74009958 Whirlpool Surface Ignitor

Surface Ignitor

Works With Model GW397LXUS06!

Rated by 1 customers 

?

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$28.88
In Stock
Fix Number:
FIX11744360
Manufacturer #:
WP74009958
Manufactured by:
Whirlpool
Works With Model GW397LXUS06!
Product Description
This is a genuine OEM replacement part. This is a top burner surface ignitor, it is part of the burner assembly on ranges and cooktops. The burner ignitor uses electrical current to heat up and produce the spark you need to light the burner. If you notice that your burner is not creating the spark needed to light you may have an issue with your ignitor. If your ignitor is glowing but the gas is not lighting that also indicates your ignitor is not getting hot enough and needs to be replaced. Before beginning this repair unplug your appliance and shut off the gas supply. This surface ignitor is sold individually.
Works with the following brands:
Maytag, Amana, Whirlpool, Jenn-Air
Works with the following products
Range
Fixes the following symptoms
Will Not Start
Part Number Cross Reference
Part# WP74009958 replaces these:
AP6011166, 74009958, 82000311
Questions and Answers 1 Installation Instruction Model Compatibility
Product Description Questions and Answers Installation Instructions Model Compatibility

Product Description

This is a genuine OEM replacement part. This is a top burner surface ignitor, it is part of the burner assembly on ranges and cooktops. The burner ignitor uses electrical current to heat up and produce the spark you need to light the burner. If you notice that your burner is not creating the spark needed to light you may have an issue with your ignitor. If your ignitor is glowing but the gas is not lighting that also indicates your ignitor is not getting hot enough and needs to be replaced. Before beginning this repair unplug your appliance and shut off the gas supply. This surface ignitor is sold individually.

  • Works with the following brands:
    Maytag, Amana, Whirlpool, Jenn-Air
  • Works with the following products:
    Range
  • Fixes the following symptoms:
    Will Not Start
  • Part# WP74009958 replaces these:
    AP6011166, 74009958, 82000311

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Paul from Gunnison, CO
Parts Used:
WP74009958
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Igniter insulator was cracked, shorting out, not lighting burner
Remove enamel burner top (gravity placement) of burner where igniter has malfunction. Remove two (2) screws holding down burner body (phillips #2). This exposes the burner sub-housing, including the insulated igniter, that is below the stove top pan. Temporarily re-attach burner sub-housing to the stove top pan with same two (2) screws (w ithout the burner body, this is so that you have resistance for removing the insulated igniter). Remove the insulated igniter by removing one (1) screw (phillips #1), taking care not to drop this screw through the stove top pan opening. Lift the insulated igniter straight up. There is a wire attached to the insulated igniter with a pressure fitting terminal. Remove the male insulated igniter terminal from the female wire terminal. This may require gentle pulling and wiggling back and forth. Make sure you hold the wire and do not pull it all the way up above the stove pan. The terminals will come apart without special tools. Once removed, discard old insulated igniter and replace with new insulated igniter, making sure that the male and female terminals fit snuggly. This may require a pair of pliers to crimp the female terminal so that it provides a tight fit for the male terminal on the new insulated igniter. Reverse the process of mounting the insulated igniter to the sub housing with one (1) screw and remove the two (2) screws that are temporarily holding the sub-housing to the stove top pan. Place the burner body above the stove top pan, aligning it with the burner sub-housing screw holes below. Screw the burner body to the burner sub-housing with two (2) screws. Replace the enamel burner top (gravity placement).
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11744360
Manufacturer Part Number: WP74009958
Brand
Model Number
Description
Amana
AGR5715QDB
Range - Freestanding, Gas
Amana
AGR5715QDQ
Range - Freestanding, Gas
Amana
AGR5715QDS
Range - Freestanding, Gas
Amana
AGR5715QDW
Range - Freestanding, Gas
Amana
AGR5725QDB
Range - Freestanding, Gas
Amana
AGR5725QDQ
Range - Freestanding, Gas
Amana
AGR5725QDS
Range - Freestanding, Gas
Amana
AGR5725QDW
Range - Freestanding, Gas
Amana
AGR5725RDB
Range - Freestanding, Gas
Amana
AGR5725RDB12
Range
Amana
AGR5725RDB13
Range
Amana
AGR5725RDB14
Range
Amana
AGR5725RDB15
Range
Amana
AGR5725RDB16
Range
Amana
AGR5725RDQ
Range - Freestanding, Gas
Amana
AGR5725RDQ12
Range
Amana
AGR5725RDQ13
Range
Amana
AGR5725RDQ14
Range
Amana
AGR5725RDQ15
Range
Amana
AGR5725RDQ16
Range
Amana
AGR5725RDS
Range - Freestanding, Gas
Amana
AGR5725RDS16
Range
Amana
AGR5725RDW
Range - Freestanding, Gas
Amana
AGR5725RDW12
Range
Amana
AGR5725RDW13
Range
Amana
AGR5725RDW14
Range
Amana
AGR5725RDW15
Range
Amana
AGR5725RDW16
Range
Amana
AGR5735QDB
Range - Freestanding, Gas
Amana
AGR5735QDQ
Range - Freestanding, Gas