Ratings submitted by customers like you who bought this part.
?
$19.63
In Stock
Fix Number:
FIX11741460
Manufacturer #:
WP3392519
Manufactured by:
Whirlpool
Works With Model 11060817990!
Product Description
The dryer thermal fuse, also sometimes referred to as the thermal cut off or temperature fuse, is a 2 by 1/2-inch, white, plastic safety mechanism that halts the flow of electricity to the motor circuit when a dryer overheats. If the fuse is missing or broken, your dryer will not start. A thermal fuse fails when the exhaust temperature exceeds the fuse rating, that is when the temperature rises above the temperature that the fuse is intended to manage. This can be caused by the heating element shorting, a regulating thermostat or thermistor failure, or with a partially restricted exhaust vent. The fuse attaches to the blower wheel housing. It must be replaced when there is no longer continuity between the terminals. This is a one-time fuse, meaning it cannot be re-set. The replacement part features two 3/16-inch terminals. While performing this repair, we recommend checking to make sure all vents are cleared and vacuumed. This OEM part is sold individually.
Works with the following brands:
Whirlpool, Kenmore, KitchenAid, Roper
Works with the following products
Dryer, Washer Dryer Combo
Fixes the following symptoms
Not Heating, Too hot, Won’t Start, Touchpad does not respond
The dryer thermal fuse, also sometimes referred to as the thermal cut off or temperature fuse, is a 2 by 1/2-inch, white, plastic safety mechanism that halts the flow of electricity to the motor circuit when a dryer overheats. If the fuse is missing or broken, your dryer will not start. A thermal fuse fails when the exhaust temperature exceeds the fuse rating, that is when the temperature rises above the temperature that the fuse is intended to manage. This can be caused by the heating element shorting, a regulating thermostat or thermistor failure, or with a partially restricted exhaust vent. The fuse attaches to the blower wheel housing. It must be replaced when there is no longer continuity between the terminals. This is a one-time fuse, meaning it cannot be re-set. The replacement part features two 3/16-inch terminals. While performing this repair, we recommend checking to make sure all vents are cleared and vacuumed. This OEM part is sold individually.
Works with the following brands:
Whirlpool, Kenmore, KitchenAid, Roper
Works with the following products:
Dryer, Washer Dryer Combo
Fixes the following symptoms:
Not Heating, Too hot, Won’t Start, Touchpad does not respond
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
November 20, 2021
My dryer will not shut off until I manually turn the timer fully to the stop position. Could replacing the Dryer Thermal Fuse fix this problem? the site says it will 55% of the time and also says replacing time is the fix 7% of the time. What are your thoughts for my dryer that will not stop?
For model number MEDC465HW0
Hi James,
Thank you for your question. If your dryer is not shutting off, the part that fixes the issue most of the time is the thermal fuse. If the thermal fuse is not the issue, there are some other parts that you will need to check to see which one is causing the issue. You will also need to check the heating element, the high limit thermostat, the timer, the door switch, and the drive motor. You will find information on how to test these parts under Free Repair Help and Instant Repairman on our website. We hope this helps! Good luck with the repair!
I just change my timer switch now I am getting no heat at all. I don't have a homes tester any suggestion as to what could be the problem. I was getting some heat but not enough due to the length of time the heat stay on, just got a new timer now as stated no heat at this point!
For model number LGR7620LW0
Hello Cluet, Thank you for the question. This could be an indication the Dryer Cycling Thermostat, M Series New Style Coil Kit, Thermal Cut-Off Fuse Kit, the Dryer Radiant Flame Sensor or the Igniter Kit is faulty and may need to be replaced. We hope this helps, good luck with this repair!
Had the dryer for over 30 years.
Dryer turns on and sometimes after a cycle is finished it won’t turn on again. When I push the start knob there is a buzzing sound. Then I let it cool and it starts again. Sometimes when I push the knob nothing. Then I wait and it starts. Could it be the thermal fuse? Help.
For model number Maytag dryer DE608
Hello Howard, thank you for asking. Our research shows that you may need to check the following parts to fix the issue: thermostat, part number FIX11740647, cycling thermostat, part number FIX11743793, blower wheel, part number FIX2200270, and door switch, part number FIX1964648. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
What if the heating element does not light and no propane or gas but the dryer still runs?
For model number WGD6200SW1
hello Stanford, Thank you for the question. This could be a few parts. We suggest testing the M Series New Style Coil Kit. The coils can be tested using a multi-meter tool. The 2-prong coil read 1,000-1,300 ohms. The 3-prong coil will read 1,300-1,400 ohms across prongs 1 and 2, and 500-600 ohms across prongs 1 and 3. You can also test the Igniter. test anywhere between 50 and 400 ohms of resistance. For the Radiant Flame Sensor, set your multi-meter to the lowest setting and then calibrate it to show zero. Take each probe of your meter and touch one to each of the prongs on your sensor. If the meter continues to show zero or infinite ohms, your sensor is bad and needs to be replaced. We hope this helps!
Sourced directly from the manufacturer, this heating element is an OEM approved replacement part for a variety of dryers and is sold individually. It measures approximately 10.5 inches long, 7.5 inches wide and 2 inches ...
This thermostat is an OEM replacement part for a dryer. It is sold individually. It measures approximately 2-inches by 1.5-inches, is black and silver, and constructed of plastic and metal material. You will find this pa...
This is a genuine OEM replacement igniter kit for your gas-heated clothes dryer. The silicon carbide igniter is used to light the gas that creates the heat in order to dry your clothes. If your dryer is not heating, take...
This genuine OEM part is a radiant flame sensor for your gas dryer. It is used to determine when the temperature of the igniter is hot enough to ignite the gas. Once the igniter is hot enough, it allows the valve to open...
This OEM high-limit thermostat kit includes the thermal cut-off fuse and the high-limit thermostat. The purpose of this part is to cut-off power to the dryer when it overheats. Common indications that this part requires ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Deann O - April 1, 2022
Verified Purchase
it worked
I didn't think it would fix the problem but in 5 minutes I got my 25 year old dryer to work again
★★★★★
★★★★★
Carolyn U - October 22, 2021
Verified Purchase
I did it
I looked up the part by the serial number ordered it wow dryer works not bad fo a 77 year grandma love the Fix parts thanks
★★★★★
★★★★★
Sonney L - August 6, 2021
Verified Purchase
Blown thermal fuse
Dryer would not start. While testing components found the thermal fuse did not have continuity. Cause was a plug in the vent pipe. Cleared pipe, installed fuse from fix.com and it was good to go.
★★★★★
★★★★★
Peter T - August 4, 2021
Verified Purchase
perfect
needed the fuse replaced when dryer stopped blowing out hot air. Fix.com had the exact part, good price, and quick delivery. The part fit perfectly and the dryer was up and running in minutes.
★★★★★
★★★★★
Rick M - July 28, 2021
Verified Purchase
Broken dryer
The part fit perfect and now the dryer works great. Thanks fix.com
★★★★★
★★★★★
Audra D T - June 24, 2021
Verified Purchase
Fast service
We received the part in a timely manner and was in working condition
★★★★★
★★★★★
Sherry B - April 28, 2021
Verified Purchase
Perfect fit
Took a little longer to arrive but it works!
★★★★★
★★★★★
Donald K - March 18, 2021
Verified Purchase
Thanks
Thank you very happy and will use you again .
★★★★★
★★★★★
Cathy L H - September 23, 2020
Verified Purchase
Part fitted
The part fit and with the video I was able to do it myself unfortunately ,my dryer still doesnt start.
★★★★★
★★★★★
L Marlene S - August 20, 2020
Verified Purchase
DIY
Great parts and service videos. All went well and it was a pleasant experience. Thank You.
< Prev
1
2
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11741460
Manufacturer Part Number: WP3392519
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
