This kit allows you to convert your appliance from natural gas to liquid propane.
Works with the following brands:
KitchenAid, Whirlpool
Works with the following products:
Cooktop
Part# WP3192741 replaces these:
3192741
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
September 18, 2022
I need a gas to propane conversion kit for the oven only (cooktop is done already)
Can you recommend a part # for me please
For model number KSGG700EBS2
Hello John, thank you for writing. The part number FIX12070661 is LP orifice is for the bake and broil, 17K & 11K. The LP orifice helps control the gas that comes out of the burner tubes. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you
Hi Nathan,
Thank you for your question. There is a liquid propane orifice conversion kit listed for your cooktop. The part number listed under your model number for the liquid propane orifice conversion kit is FIX11740944. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nathan
March 30, 2022
Regulator switch over too propane
For model number ICS300RQ04
Hello Nathan, thank you for contacting us. To convert your oven from natural gas to propane you will need to access the regulator and adjust the plastic plug on the cap. Take a wrench and unscrew the cap. Under the cap, you will find a plug. The gas type that the regulator is set for is closest to the cap which would be natural gas. Take the plug out, rotate and place the opposite end inside the cap and snap it in. The plug will have the gas type molded into it. We hope this helps. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
April 22, 2022
I need the LP orifices conversion kit for the bake and broil on the oven.
For model number KSGG700ESS2
Hello James, Thank you for your inquiry. We have researched the model number you have provided and the conversion kit for bake and broil is part# FIX12070661. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I need to change the orfices from propane to natural gas can this be done and how much are the parts
For model number kgcs166gss07
Hello, Thank you for your inquiry. To convert back to natural gas, you would need the orifice holders for this unit, which are part# FIX11748693-right rear, FIX11749162-left front, part# FIX11748693-right rear, part# FIX11748692-center, and part# FIX11748690-right front and left rear. The prices are listed above the Add to Cart button under the part description. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I need the orifices for the oven/broiler to convert to propane.
For model number KFGG504KPS
Hello Cindy, thank you for reaching out. The LP Orifice for your model is part number FIX12070661. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Kitchenaid OVEN-BROILER was what I requested. I have already converted the cooktop burners. Please advise what part is needed for the oven and broiler.
For model number KFGG504KPS
Hello Cindy, thank you for reaching out. The part number FIX12070661 is LP orifice is for the bake and broil, 17K & 11K. The LP orifice helps control the gas that comes out of the oven burner tubes. We hope this helps, good luck with this repair!
Trying to find the 5 Burner orifices for use with LP for this gas range?
(1) 5000 BTU
(1) 8000 BTU
(1) 9200 BTU
(1) 15,000 BTU
(1) 17,000 BTU
Do you sell?
For model number KSGG700ESS
Hello Mark, thank you for the question. According to our research, the conversion kit you have mentioned is not compatible with your model. The compatible conversion kit for models KSGG700ESS0 and KSGG700ESS1 is part number FIX11766764. The conversion kit that fits in model KSGG700ESS2 is part number FIX12745755. We hope this helps!
I moved into a new house and one of my burners on my Kitchenaid stovetop when I turn it on puts out too much gas. My gas company believes when the stove was put in that one of the orifaces was not switched from lp gas to the propane. What do I need to buy to fix.
For model number KSGG700ESS1
Hi Debbie,
Thank you for your question. If you need an LP stove top orifice, they are sold in an liquid propane conversion kit. The part number listed under your model number for the liquid propane conversion kit is FIX11766764. There is also a liquid propane orifice that you can purchase for the oven. The part number listed for it is FIX12070661. For some models, you may also need to adjust the regulator, so that the oven is set for liquid propane. Please consult your owner's manual for information. If you would like to place an order for these parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I need the LP conversion kit for both he cooktop and the broiler and bake : Range LP Bake & Broil Orifice Kit. Includes orifice #100 and orifice #56 AND (3) 1.08MM (2) 0.84MM (1) 0.64MM for the cooktop.
For model number KSGB900ESS
Hello Sharon, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX11766764 for the Conversion Kit for the Surface Burners and Fix Number: FIX12070661 for the Bake and Broil. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Remove grills and caps on top of burners. There are two screws holding each burner in place. They require a star tip screw driver which you may need to buy. Remove them. I would do one at a time to keep things in order. Once removed you will see down in a hold that the small brass orifice nut is down the bottom of a shaft of sorts. You
... Read more need to have a nut driver that fits (I think 3/8) on the end of a screw driver handle to get to them. This is how you do it as you don't take the bottom off the cooktop. You will be nervous about them falling off on the way out and the new ones falling off on the way in. You don't want to let that happen. It was not too big a deal for me as it set up in the nut driver rather far and didn't easily fall out. A trick for installing the new ones is to put a small piece of paper towel on the nutdriver and push the new orifice into it and it holds it snug when putting the new one down the shaft. Ok, this conversion kit of new orifices is color coded and there are no instructions. Worse yet there are really no instructions online. There apparently was a separate "part" with instructions but I'm not convinced it actually exists. I think a guy at "Dave's repair" website gave the best advice on the color coding. Basically green is the largest and 12,000 BTU (my model front left). Red are the smallest and 5,000-6000 BTU (rear left and front right). The blue is just smaller than the green and I used on my second largest burner (right rear) and around 11,000 BTU and then there are three solid brass with no color. I only needed one more and it went on my center burner which is approximately 9000 BTU. All BTU in propane, and there should be a sticker on the back of your unit with the BTU for each burner. The other two brass ones are not needed as these conversions kits are reported to be universal for Whirlpool and necessary if you have a stove too. I hope I got all of the colors correct but they look correct now that it is burning. The flames appear consistent with the burner size. You can see a variation in orifice hole sizes just looking at them as well but it is difficult to see between some colors. Ok, one more very important tip. You are not done. The low setting will be too high. You will burn everything and not be able to simmer things. You remove the handles one at a time. There is a burner adjustment screws at the very bottom of the metal shaft that holds the handles. You need a narrow flat screw driver, and I mean narrow. You may need to grind one to work. Now light an individual burner to the lowest setting, pull off handle, insert screwdriver, turn it slowly to adjust the flame at the lowest setting. You can make it too low. You should not be able to easily blow it out. Repeat for all burners and enjoy gas cooking! You are welcome for all the info as for some reason it is hard to come by. Some instructions would have been nice. By the way, I also had to buy the pressure regulator since mine was missing. You likely have one on yours. You need to remove the largest cap nut and there is a plastic post type thing likely attached to the cap or just sitting in there. It needs to be flipped over (upside down) for propane. Then simply replace the cap. Good luck!
Read less
19 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(1 Review)
1.0
★★★★★
★★★★★
Filter By Rating:
5★
0
4★
0
3★
0
2★
0
1★
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Alan D - September 25, 2019
Verified Purchase
wrong part
this item was advertised as the replacement kit for Kitchen Aid # 13190. Not even close.
please send a return authorization
September 26, 2019
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
Model Compatibility
This part works with the following models:
Fix Number: FIX11740944
Manufacturer Part Number: WP3192741
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
