Lid Check Switch WP207166
Works With Model 101963581!
$44.24
In Stock
- Fix Number:
- FIX11738787
- Manufacturer #:
- WP207166
- Manufactured by:
- Whirlpool
Works With Model 101963581!
Jump to:
Product Description
This is used to start your washer once the desired water level is reached.
-
Works with the following brands:Maytag, Amana, International, Jenn-Air
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Will Not Start, Will not agitate, Will not drain
-
Part# WP207166 replaces these:AP6005728, 2-7166, 207166
- Works with the following brands:
- Maytag, Amana, International, Jenn-Air
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Will Not Start, Will not agitate, Will not drain
- Part# WP207166 replaces these:
- AP6005728, 2-7166, 207166
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Gary from Pickerington, OH
- Parts Used:
- WP207166
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Motor wouldn't' spin
Tested micro switch with VOM, switch was open instead of closed for motor operation. One screw held switch in position.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shelby, from Kankakee, IL
- Parts Used:
- WP207166
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Washer fills with water, then stops.
Ileays unplug the appliance before attempting any repair or trouble shooting. I watched a few YouTube videos as a guide. I was able to rig the washer to work with a few clip leads until the part was delivered. First, due to the age of the washer the control panel wasn't a flip top. I just had to unscrew 4 screws to gain access. There was
... Read more
also a schematic inside. **Remember where the clips connected to the old part.** It took a bit of time to work the clips off on the part. The part is held on by 1 screw. Remove the screw, add new part, attach clips to new part, done. Saved $$$$! Thanks!
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Otho from Old Hickory, TN
- Parts Used:
- WP207166
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The washer timer would fail to advance intermittently
Diagnosing the problem was the most time-consuming thing to do. In order to perform this step, I took the access panel off the control panel with the two Phillips-head screws: one on the top right and one on the top left of the chrome trim surrounding the panel. When the timer failed to advance, I probed around with a wooden dowel and tou
... Read more
ched various electrical components. The Lid Check Switch could be moved slightly and cause the timer to begin advancing again. So, I got the part number off of it, found the switch on the site, bought it, picked it up off my front porch and installed it. Easy to do, remove one screw through the switch body, removed old switch after photographing the wire connections, hooked the wires to the same terminals on the new switch, and put the single screw through the new switch into the threaded socket embedded in the mount. I checked the lid operating rod that contacts the micro-switch on the Lid Check Switch to make sure it contacted it enough but not too much. It was fine without adjusting it. I replaced the panel and ran a load of clothes. It works like new. This is the second repair on this vintage Maytag - 23 years old. The first was the filler tube assembly - about $32 - now this for $26 including shipping. That is a ridiculously low $2.52 per year in repairs. Love those old Maytags.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Fort Thomas, KY
- Parts Used:
- WP207166
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Wouldn't run.
Very easy part replacement. I wanted to post here and say how easy and precise the troubleshooting section of this site was and everything came together very easily. Great site. Thank you!
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11738787
Manufacturer Part Number: WP207166
Manufacturer Part Number: WP207166
| Brand | Model Number | Description |
|---|---|---|
| Kenmore | 101963580 | Washer - Kenmore Washing Machine Model 101.963580 (101963580, 101 963580) Parts |
| Kenmore | 101963581 | Washer - Kenmore Washing Machine Model 101.963581 (101963581, 101 963581) Parts |
| Kenmore | 101963582 | Washer - Kenmore Washing Machine Model 101.963582 (101963582, 101 963582) Parts |
| Maytag | 6329 | Washer - MAYTAG AUTOMATIC WASHER |
| Maytag | 6349 | Washer - MAYTAG AUTOMATIC WASHER |
| Maytag | 6359 | Washer - MAYTAG AUTOMATIC WASHER |
| Maytag | A1910 | Washer - Top Loading |
| Maytag | A25CA | Washer |
| Maytag | A25CAE | Washer |
| Maytag | A25CM | Washer |
| Maytag | A25CME | Washer |
| Maytag | A25CS | Washer |
| Maytag | A25CT | Washer |
| Maytag | A26CA | Washer |
| Maytag | A26CAE | Washer |
| Maytag | A3910 | Washer - Top Loading |
| Maytag | A4910 | Washer - Top Loading |
| Maytag | A5000 | Washer - Top Loading |
| Maytag | A5910 | Washer - Top Loading |
| Maytag | A6910 | Washer - Residential |
| Maytag | A7300 | Washer - Top Loading |
| Maytag | A7400 | Washer - Top Loading |
| Maytag | A7500 | Washer - Residential |
| Maytag | A7500S | Washer - Residential |
| Maytag | A7500W | Washer - Residential |
| Maytag | A7800 | Washer - Residential |
| Maytag | A8100 | Washer - Residential |
| Maytag | A8120 | Washer - Top Loading |
| Maytag | A8140 | Washer - Top Loading |
| Maytag | A8200 | Washer - Top Loading |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.