10369126-1-M-Heatstar-28082-Thermocouple
Part Location Diagram of 28082 Heatstar Thermocouple
See part 800 in the diagram
( Grid squares measure 1x1 inch )
10369126-1-S-Heatstar-28082-Thermocouple Part Location Diagram of 28082 Heatstar Thermocouple

Thermocouple 28082

$ 34.71
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10369126
Manufacturer #:
28082
Manufactured by:
Heatstar

Product Description

This is a genuine OEM replacement part that has been sourced directly from the manufacturer. The thermocouple measures temperature and acts as a sensor for the thermoelectric valve. When the pilot light is on it heats the thermocouple, which creates and sends voltage to the valve. When the light goes off the voltage travelling to the valve stops, signaling to the valve that the flow of gas needs to stop. This safety mechanism stops dangerous levels of gas from building up. The thermocouple will become less effective and accurate over time, which is why it is important to routinely check this part and replace it as required. The fittings are made of brass, and the connector is made of copper. This part is sold individually.

  • Works with the following brands:
    Heatstar, Mr Heater
  • Works with the following products:
    Construction Heater