We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
September 13, 2023
Are these parts15 1/4” long?
For model number 9312-64
Hi Bob, thank you for your inquiry. The dimensions of the collect box kit are as given:
Length 20-1/2 Inches.
Width 1-1/2 Inches.
Height 3/4 Inch.
We hope this information is useful!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
To install the collector box you need to remove the burners. Each of the three burners is held down by a nut which over a five year period was rusty and totally bound. To remove the nut and replace the fastener it was necessary to drill a hole through the center of the bolt and grind off the nut. Using a screw extractor remove the bolt re
... Read moremains then retread the hole and install a new fastener. Once the burners are removed the collector installation is a one minute job.
Read less
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX10282626
Manufacturer Part Number: 10342-E400A
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 10342-E400A Broil King Collect Box Kit")
_WW_1.gif "Part Location Diagram of 10342-E400A Broil King Collect Box Kit")
