Carbon Brush (2Pc Set)

This is a genuine OEM part that has been sourced directly from Alpha. This is a 2 piece set of carbon bushes commonly used in tile saws. These carbon brushes comes with wire lead and brush spring attached. Carbon bushes in your tile saw take the electricity from outside the motor and use it drive the spinning armature. Over time these carbon brushes will wear down, this is due to the amount of friction they experience. Signs your carbon brushes might be worn down are that the motor is running intermittently, there are electric breaking issues, and engine is experiencing reduced power. We recommend you replace both carbon brushes at the same time, even if only one is worn out. Before you begin this repair make sure you unplug your power tool.