Shaft Lock Assembly
- Fix Number:
- FIX10259958
- Manufacturer #:
- 2610009839
- Manufactured by:
- Dremel
- Product Description
- This lock assembly includes one collar and one pin. It assists in locking the spindle shift. Over time, the pin can deteriorate, which results in it slipping. The retainer can also break. For this repair, start by removing the collet and collet nut, followed by the collar on the front of the tool. You will then need to disassemble the housing. You will now need to lift the motor and switch assembly out of the housing. The lock pin and retainer are located at the front of the housing and will need to be removed. The new lock can now be installed inside the tool.
- Works with the following brands:
- Bosch, Dremel
- Works with the following products
- Multi-Tool, Router, Hammer Drill
Product Description
This lock assembly includes one collar and one pin. It assists in locking the spindle shift. Over time, the pin can deteriorate, which results in it slipping. The retainer can also break. For this repair, start by removing the collet and collet nut, followed by the collar on the front of the tool. You will then need to disassemble the housing. You will now need to lift the motor and switch assembly out of the housing. The lock pin and retainer are located at the front of the housing and will need to be removed. The new lock can now be installed inside the tool.
-
Works with the following brands:Bosch, Dremel
-
Works with the following products:Multi-Tool, Router, Hammer Drill
Videos For installing this part.
Replacing your Shaft Lock Assembly
Questions and Answers
Be the first to ask our experts a question about this part!
Model Compatibility
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.