10243433-1-M-Campbell Hausfeld-SKN02800AV-Trigger Valve O-Ring Kit
Part Location Diagram of SKN02800AV Campbell Hausfeld Trigger Valve O-Ring Kit
See part 28 in the diagram
( Grid squares measure 1x1 inch )
10243433-1-S-Campbell Hausfeld-SKN02800AV-Trigger Valve O-Ring Kit Part Location Diagram of SKN02800AV Campbell Hausfeld Trigger Valve O-Ring Kit

Trigger Valve O-Ring Kit

Works With Model NS219000!
$ 3.99
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10243433
Manufacturer #:
SKN02800AV
Manufactured by:
Campbell Hausfeld
Works With Model NS219000!

Product Description

This is a genuine OEM part that has been sourced directly from Campbell Hausfeld. The o-rings inside your nail gun are made of rubber, so as the inside of your nail get gets gritty and dirty these rings begin to wear down. When the o-rings on your trigger valve assembly have worn down the trigger is less effective, the nail gun could become sluggish or it could fail to shoot nails entirely. This kit of o-rings includes all of the part you will need to tune-up the trigger valve in your nail gun. When installing new o-rings be sure to properly lubricate them. Before you begin this repair remove the magazine, it will allow you better access to the trigger valve.

  • Works with the following brands:
    Campbell Hausfeld
  • Works with the following products:
    Nailer