Watch the install video
10187192-1-M-DeWALT-N020621SV-Switch,v.s.r.
Part Location Diagram of N020621SV DeWALT Switch,v.s.r.
See part 43 in the diagram
Replacing your DeWALT Hammer Drill Switch,v.s.r.
10187192-1-S-DeWALT-N020621SV-Switch,v.s.r. 360 view
( Grid squares measure 1x1 inch )
10187192-1-S-DeWALT-N020621SV-Switch,v.s.r. 10187192-2-S-DeWALT-N020621SV-Switch,v.s.r. 10187192-1-S-DeWALT-N020621SV-Switch,v.s.r. 360 view
Part Location Diagram of N020621SV DeWALT Switch,v.s.r. Replacing your DeWALT Hammer Drill Switch,v.s.r.

Switch,v.s.r. N020621SV

$ 88.10
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10187192
Manufacturer #:
N020621SV
Manufactured by:
DeWALT

Product Description

This is a genuine manufacturer approved replacement switch. It is specially produced for DeWalt hammer drills. It is the part of the tool handling on/off operations as well as the variable speed and reverse functions of a tool. Mechanical switches will wear out over time requiring a replacement. Switch has a plastic body and it is sold individually. Please note, this switch has an LED light build into it. To complete this repair you will need a screwdriver. • Remove the housing screws • Carefully remove the housing pieces • Disconnect wires from the old switch • Remove the old switch • Secure the new switch in the housing • Connect the wires • Reassemble and test the tool

  • Works with the following brands:
    DeWALT
  • Works with the following products:
    Hammer Drill, Hammer