Watch the install video
10180911-1-M-DeWALT-605040-27-Ball Bearing
Part Location Diagram of 605040-27 DeWALT Ball Bearing
See part 47 in the diagram
Replacing your DeWALT Grinder Ball Bearing
10180911-1-S-DeWALT-605040-27-Ball Bearing 360 view
( Grid squares measure 1x1 inch )
10180911-1-S-DeWALT-605040-27-Ball Bearing 10180911-2-S-DeWALT-605040-27-Ball Bearing 10180911-1-S-DeWALT-605040-27-Ball Bearing 360 view
Part Location Diagram of 605040-27 DeWALT Ball Bearing Replacing your DeWALT Grinder Ball Bearing

Ball Bearing 605040-27

Works With Model D55166!
$8.25
In Stock
Fix Number:
FIX10180911
Manufacturer #:
605040-27
Manufactured by:
DeWALT
Works With Model D55166!

Jump to:

Product Description

This part includes one OEM ball bearing. This ball bearing is sealed on both sides. They are designed to minimize friction between moving parts and evenly distribute weight. Bearings are a general wear part that require regular maintenance to keep your equipment running smoothly and efficiently.

  • Works with the following brands:
    DeWALT, Black and Decker, DeVilbiss, Porter Cable
  • Works with the following products:
    Grinder, Circular Saw, Chop Saw, Miter Saw
  • Part# 605040-27 replaces these:
    605040-27, P605040-27
Works with the following brands:
DeWALT, Black and Decker, DeVilbiss, Porter Cable
Works with the following products
Grinder, Circular Saw, Chop Saw, Miter Saw
Part Number Cross Reference
Part# 605040-27 replaces these:
605040-27, P605040-27

Videos For installing this part.

Replacing your Ball Bearing

Replacing your Ball Bearing

Questions and Answers

Be the first to ask our experts a question about this part!

Carbon Brush
$11.02
In Stock
Part Number: FIX10181643
This OEM brush is sold individually, however two are needed in most power tools, and should be replaced at the same time, even if only one is worn. If the motor of your power tool is running poorly, worn brushes are the ...
Carbon Brush
$6.20
In Stock
Part Number: FIX16687899
This is a genuine Dewalt replacement part, it is sold individually. Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's e...
Brush and Spring
★★★★★
★★★★★
(1)
$13.91
In Stock
Part Number: FIX10166057
This carbon brush and spring kit includes a carbon brush, wire lead, and a spring. The parts fit a variety of tools such as saws. If you notice your motor is running poorly or is intermittent, then check the brush for da...
PAD
$39.83
In Stock
Part Number: FIX12398026
The 151281-08 Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over t...
Blade Adapter Ring
★★★★★
★★★★★
(2)
$7.19
In Stock
Part Number: FIX10166690
This is an authentic adapter ring used to mount the saw blade to your miter saw. It is sold as an individual part. Standard 12-inch saw blades have a 1-inch arbor hole, while most miter saw arbors are 5/8 of an inch. Thi...
BRUSH
$12.35
In Stock
Part Number: FIX12410247
(Sold Individually) This motor brush is for grinders. The motor brush transfers electric current to the spinning armature in the motor. Unplug the grinder before installing this part. Wear work gloves to protect y...
On-off Switch
★★★★★
★★★★★
(1)
$6.51
In Stock
Part Number: FIX10166039
This part includes one on-off switch, also referred to as a rocker switch. This switch is an original manufacturer replacement part. The switch controls the flow of electricity to the motor, and when it wears it can make...
Dust Seal
$13.56
In Stock
Part Number: FIX10166528
Genuine OEM replacement part, this item is sold individually. The 151553-00 Dust Seal/Brake is a dual propose part. It is a Dust Seal to help prevent dust and debris from entering the motor assembly. It also acts as a Br...
Screw
$6.51
In Stock
Part Number: FIX10166149
This is a genuinely sourced screw for a sander. This screw secures the sanding pad to the tool. If the screw becomes damaged or lost you may notice that the sanding pad becomes loose fitting. The sander has three of thes...
Retainer ( Includes Self Tappi
$6.51
On Order
Part Number: FIX10168760
This item is an authentic, OEM sourced replacement part that is intended to be used with random orbital sanders from DeWalt, Black & Decker, and Porter Cable. The retainer is used to support the bearing between the fan a...
Dust Bag
$23.18
On Order
Part Number: FIX10181205
This is an OEM dust bag for a sander. The dust bag assembly includes a mounting bracket that connects the dust bag to the sander, a cloth bag, which filters debris, a mounting ring, which allows the bag to be effortlessl...
Bearing Retainer
$6.51
In Stock
Part Number: FIX10180805
Genuine OEM replacement part designed for certain Random Orbit Sanders. This item is made out of Metal and it is Sold Individually. This is the bottom Bearing Retainer that keeps the bearing in place. It is attached to t...
Bearing Cup
$6.51
In Stock
Part Number: FIX10181303
This is an authentic OEM sourced component which is specially designed for use with DeWALT and Black and Decker grinders and saws. It provides an identical replacement for a missing or a faulty bearing cup that was insta...
Bearing Retainer
$6.51
In Stock
Part Number: FIX10180809
This authentic item is supplied by the original manufacturer for DeWALT random orbit sanders. It is the bottom half of the bearing retainer which is utilized to secure the armature bearing. The part is secured three scre...
Ball Bearing
$12.93
In Stock
Part Number: FIX10169620
This is an authentic OEM part. This part is used in a variety of DeWALT saws. A ball bearing facilitates smooth movement and reduces friction by transmitting the load between moving parts and securing the parts' position...
Retaining Ring
$6.51
In Stock
Part Number: FIX10172102
This is an authentic DeWalt replacement part manufactured for use with angle grinders, cut-off machines, table saws, and chop saws. This versatile retaining ring is commonly used to secure a bearing or sleeve to a shaft ...
Fan
$7.77
In Stock
Part Number: FIX10181777
This is a genuine OEM sourced replacement part that is intended to be used with orbital sanders from DeWalt, Black & Decker, and Porter Cable. The metal fan attaches to the armature drive shaft and links with the sanding...
Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$20.71
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$27.83
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
On-off Switch
★★★★★
★★★★★
(1)
$6.51
In Stock
Part Number: FIX10166039
This part includes one on-off switch, also referred to as a rocker switch. This switch is an original manufacturer replacement part. The switch controls the flow of electricity to the motor, and when it wears it can make...
Dust Seal
$13.56
In Stock
Part Number: FIX10166528
Genuine OEM replacement part, this item is sold individually. The 151553-00 Dust Seal/Brake is a dual propose part. It is a Dust Seal to help prevent dust and debris from entering the motor assembly. It also acts as a Br...
Screw
$6.51
In Stock
Part Number: FIX10166149
This is a genuinely sourced screw for a sander. This screw secures the sanding pad to the tool. If the screw becomes damaged or lost you may notice that the sanding pad becomes loose fitting. The sander has three of thes...
Retainer ( Includes Self Tappi
$6.51
On Order
Part Number: FIX10168760
This item is an authentic, OEM sourced replacement part that is intended to be used with random orbital sanders from DeWalt, Black & Decker, and Porter Cable. The retainer is used to support the bearing between the fan a...
Dust Bag
$23.18
On Order
Part Number: FIX10181205
This is an OEM dust bag for a sander. The dust bag assembly includes a mounting bracket that connects the dust bag to the sander, a cloth bag, which filters debris, a mounting ring, which allows the bag to be effortlessl...
Bearing Retainer
$6.51
In Stock
Part Number: FIX10180805
Genuine OEM replacement part designed for certain Random Orbit Sanders. This item is made out of Metal and it is Sold Individually. This is the bottom Bearing Retainer that keeps the bearing in place. It is attached to t...
Bearing Cup
$6.51
In Stock
Part Number: FIX10181303
This is an authentic OEM sourced component which is specially designed for use with DeWALT and Black and Decker grinders and saws. It provides an identical replacement for a missing or a faulty bearing cup that was insta...
Bearing Retainer
$6.51
In Stock
Part Number: FIX10180809
This authentic item is supplied by the original manufacturer for DeWALT random orbit sanders. It is the bottom half of the bearing retainer which is utilized to secure the armature bearing. The part is secured three scre...
Ball Bearing
$12.93
In Stock
Part Number: FIX10169620
This is an authentic OEM part. This part is used in a variety of DeWALT saws. A ball bearing facilitates smooth movement and reduces friction by transmitting the load between moving parts and securing the parts' position...
Retaining Ring
$6.51
In Stock
Part Number: FIX10172102
This is an authentic DeWalt replacement part manufactured for use with angle grinders, cut-off machines, table saws, and chop saws. This versatile retaining ring is commonly used to secure a bearing or sleeve to a shaft ...
Fan
$7.77
In Stock
Part Number: FIX10181777
This is a genuine OEM sourced replacement part that is intended to be used with orbital sanders from DeWalt, Black & Decker, and Porter Cable. The metal fan attaches to the armature drive shaft and links with the sanding...
Affresh Dishwasher Cleaner Tablets - 6
$22.91
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$20.71
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$18.54
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.91
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$32.12
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$27.83
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less

Model Compatibility

This part works with the following models:
Fix Number: FIX10180911
Manufacturer Part Number: 605040-27
Brand Model Number Description
Black and Decker 21115 Circular Saw - 7-1/4 Inch Circular Saw
DeWALT 25707 Orbital or Palm Sander - 31123
DeVilbiss 25708 Orbital or Palm Sander - 5-Inch Vs Orbital Sander
Black and Decker 2685-46 Circular Saw - 7 1/4 Sawcat
Black and Decker 2698-AU Circular Saw - 9-1/4 Cir.Saw - Austral
DeVilbiss 27111 Circular Saw - Circular Saw
DeVilbiss 27707 Sander - 5-Inch Ro Sander
DeVilbiss 27708 Sander - 5-Inch Ro Sander W/Evs
DeVilbiss 27712 Angle Grinder - Angle Grinder
Black and Decker 3057-04 Circular Saw - 7 1/4 Sawcat
Black and Decker 3680-46 Miter Saw - Mitre Saw-Austraila
Porter Cable 505-BDK Sander - Hd Finishing Sander
DeWALT D24000R Tile Saw - Tile Cutter
DeWALT D25892K Hammer Drill - Chipping Hammer
DeWALT D284076B3 Grinder - 6600rpm La Grinder
DeWALT D28474C Angle Grinder - 7 Lag
DeWALT D28474WAR Angle Grinder - 8000rpm Lag
DeWALT D28474WB2 Grinder - 8000rpm Lag
DeWALT D28474WB3 Angle Grinder - 8000rpm Lag
DeWALT D28474WBR Grinder - 8000rpm Lag
DeWALT D28476WAR Grinder - 8500rpm Lag
DeWALT D28476WB2 Grinder - 8500rpm Lag
DeWALT D28476WB3 Grinder - 8500rpm Lag
DeWALT D28476WBR Grinder - 8500rpm Lag
DeWALT D28493G Grinder - Large Angle Grinder
DeWALT D28493PAR Grinder - 5000rpm Lag
DeWALT D28493PB2 Grinder - 5000rpm Lag
DeWALT D28493PB3 Grinder - 5000rpm Lag
DeWALT D28493PBR Grinder - 5000rpm Lag
DeWALT D28494G Grinder - Large Angle Grinder
Ball Bearing
$ 8.25
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.