Watch the install video
10170261-1-M-DeWALT-381028-08-Brush
Part Location Diagram of 381028-08 DeWALT Brush
See part 3 in the diagram
Replacing your DeWALT Miter Saw Brush
10170261-1-S-DeWALT-381028-08-Brush 360 view
( Grid squares measure 1x1 inch )
10170261-1-S-DeWALT-381028-08-Brush 10170261-2-S-DeWALT-381028-08-Brush 10170261-1-S-DeWALT-381028-08-Brush 360 view
Part Location Diagram of 381028-08 DeWALT Brush Replacing your DeWALT Miter Saw Brush

Brush 381028-08

Works With Model DW712!
$20.63
In Stock
Fix Number:
FIX10170261
Manufacturer #:
381028-08
Manufactured by:
DeWALT
Works With Model DW712!

Jump to:

Product Description

This carbon brush fits a variety of gardening and lawn tools. The brush is a common replacement part and can easily fix most motor malfunctions. This brush comes with a wire lead and a connection terminal. Inspect the wire lead for any damage and replace immediately if burns or cracks are noticed. Refer to the diagram provided by the manufacturer for installation instructions.

  • Works with the following brands:
    DeWALT
  • Works with the following products:
    Miter Saw, Table Saw, Circular Saw
Works with the following brands:
DeWALT
Works with the following products
Miter Saw, Table Saw, Circular Saw

Videos For installing this part.

Replacing your Brush

Replacing your Brush

Questions and Answers

Be the first to ask our experts a question about this part!

Carbon Brush
$10.58
In Stock
Part Number: FIX10181643
This OEM brush is sold individually, however two are needed in most power tools, and should be replaced at the same time, even if only one is worn. If the motor of your power tool is running poorly, worn brushes are the ...
Carbon Brush
$5.95
In Stock
Part Number: FIX16687899
This is a genuine Dewalt replacement part, it is sold individually. Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's e...
Brush
$8.36
In Stock
Part Number: FIX10177102
This part includes one carbon brush with a wire lead and brush spring attached. A strong indication that the carbon brush might need to be replaced is if your equipment will not turn on or there are excessive sparks pres...
Brush and Spring
★★★★★
★★★★★
(1)
$13.36
In Stock
Part Number: FIX10166057
This carbon brush and spring kit includes a carbon brush, wire lead, and a spring. The parts fit a variety of tools such as saws. If you notice your motor is running poorly or is intermittent, then check the brush for da...
Carbon Brush Set
$18.43
In Stock
Part Number: FIX10156641
This is a genuine Makita replacement part that includes two carbon brushes with wire leads attached. Carbon brushes are essential components in power tools and are among the most commonly replaced parts due to regular we...
Blade Adapter Ring
★★★★★
★★★★★
(2)
$6.90
In Stock
Part Number: FIX10166690
This is an authentic adapter ring used to mount the saw blade to your miter saw. It is sold as an individual part. Standard 12-inch saw blades have a 1-inch arbor hole, while most miter saw arbors are 5/8 of an inch. Thi...
Miter Saw Ball Bearing
★★★★★
★★★★★
(1)
$17.98
In Stock
Part Number: FIX10188573
This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, ...
Bolt Assy
$6.25
In Stock
Part Number: FIX12530513
This is a genuine Dewalt replacement part, it is sold individually. The purpose of this bolt is to secure the blade on the miter saw models shown below. It has a 1/2 " hex head. It is 1 inch long, with left hand threads.
Wear Plate
$31.45
In Stock
Part Number: FIX10181974
This is a genuine manufacturer sourced replacement part designed for use with Dewalt miter saws. This wear plate helps to minimize the friction and avoid potential wear to the table assembly. It is made out of plastic an...
Switch
★★★★★
★★★★★
(1)
$49.25
In Stock
Part Number: FIX10181008
This is a trigger switch, which controls the on and off and variable speed functions of the power tool. This trigger has four terminals, which will damage and wear with use. If your equipment is not starting when using t...
Bushing
$12.50
In Stock
Part Number: FIX10183438
This part includes one bushing for a miter saw. This bushing is sourced right from the original manufacturer and helps to fasten the blade to the shaft/spindle. If the blade of your miter saw is wobbling, this is one of ...
Kerf Plate
$29.67
In Stock
Part Number: FIX16687705
This replacement part is specially designed for Dewalt compound miter saws. It is supplied directly from original equipment manufacturer. Kerf boards, also known as kerf plates are used to prevent excessive splintering. ...
Belt Cover
$25.02
On Order
Part Number: FIX10181975
This is a genuine OEM sourced replacement belt cover designed for use with Dewalt miter saws. It helps to cover the belt and protect is as well as the user. It is made out of plastic and it is sold individually. To com...
Kerf Plate
$12.72
In Stock
Part Number: FIX10171806
This is a kerf plate, also sometimes referred to as a kerf board. This authentic replacement part is sold individually. You will need add two to your cart to complete the set. This part is made of plastic, is yellow in c...
Ball Bearing
$7.92
In Stock
Part Number: FIX10180911
This part includes one OEM ball bearing. This ball bearing is sealed on both sides. They are designed to minimize friction between moving parts and evenly distribute weight. Bearings are a general wear part that require ...
Dust Bag
$27.80
In Stock
Part Number: FIX10186865
This is an authentically sourced dust bag for a miter saw. It includes the fabric dust bag, a wire bag support, and the plastic fitting to attach it to your equipment. It also has a zipper to make emptying it quick and e...
Drive Pulley
$19.68
In Stock
Part Number: FIX10186994
A genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT miter saws. It is an identical replacement for a missing or damaged drive pulley which was originally installed on the...
Belt
$19.02
In Stock
Part Number: FIX10166832
This is a genuine manufacturer-sourced component which is specially made for DeWALT saws. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. The purpose of the part #153...
Ball Bearing
$40.20
In Stock
Part Number: FIX10169633
This genuine manufacturer approved bearing is used to secure spindle and gear that drive the saw blade. It is designed to minimize the friction, over time bearing will begin to fail compromising units functionality. At t...
Bearing
$6.25
In Stock
Part Number: FIX10170786
This needle bearing is open on one side and closed on the other. This genuine DeWalt replacement part is sold individually. • Ball bearings minimize friction between rotating parts in your tool. The balls or roller...
Handle Set
$30.75
In Stock
Part Number: FIX10182526
This replacement handle set is specially designed for use with Dewalt compound miter saws. It is a genuine part that is supplied directly from original equipment manufacturer. This plastic handle is used to safely operat...
Wrench
$12.42
In Stock
Part Number: FIX10181217
This is a Genuine OEM replacement part used on Dewalt Miter Saws. This Wrench allows you to secure or remove a Saw Blade. Angular profile of this item makes tightening/loosening the Clamp Bolt easy. This wrench is made f...
Spiral Retaining Ring
$6.25
In Stock
Part Number: FIX10166897
This is a genuine OEM sourced replacement part designed for use with Dewalt miter saws. This is the spiral retaining ring for the drive pulley. It is made out of metal and it is sold individually. To replace it you would...
Armature Assembly
$212.95
In Stock
Part Number: FIX10188717
This authentic item is supplied directly from the original equipment manufacturer for use with DeWALT miter saws. The armature assembly attaches to the field & case. When replacing this part a screwdriver, a socket set, ...
Ball Bearing
$11.03
In Stock
Part Number: FIX10180912
This is an authentic replacement part constructed by the original manufacturer. It is used in DeWALT power tools, including miter saws. Ball bearings are used to buffer moving metal parts. This protects them while also c...
Needle Bearing
$8.63
In Stock
Part Number: FIX10171417
Gasket
$8.63
On Order
Part Number: FIX10171370
An authentic manufacturer sourced replacement part that is specially produced for use with Dewalt miter saws. This is the gasket that is used to create a seal for the gear case assembly. Over time gaskets may get compres...
Kerf Board
$10.30
In Stock
Part Number: FIX10181978
This is an authentic manufacturer sourced replacement part used on Dewalt compound miter saws. Kerf boards (also called kerf plates) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong k...
Wrench Holder
$6.25
In Stock
Part Number: FIX10171391
This is an authentic DeWalt replacement part sourced from the original manufacturer for use with miter saws. The metal wrench holder is commonly used to store the blade wrench onboard of the miter saw. This wrench holder...
Affresh Dishwasher Cleaner Tablets - 6
$22.00
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$19.89
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$17.80
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$27.76
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$30.85
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$26.73
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
Miter Saw Ball Bearing
★★★★★
★★★★★
(1)
$17.98
In Stock
Part Number: FIX10188573
This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, ...
Bolt Assy
$6.25
In Stock
Part Number: FIX12530513
This is a genuine Dewalt replacement part, it is sold individually. The purpose of this bolt is to secure the blade on the miter saw models shown below. It has a 1/2 " hex head. It is 1 inch long, with left hand threads.
Wear Plate
$31.45
In Stock
Part Number: FIX10181974
This is a genuine manufacturer sourced replacement part designed for use with Dewalt miter saws. This wear plate helps to minimize the friction and avoid potential wear to the table assembly. It is made out of plastic an...
Switch
★★★★★
★★★★★
(1)
$49.25
In Stock
Part Number: FIX10181008
This is a trigger switch, which controls the on and off and variable speed functions of the power tool. This trigger has four terminals, which will damage and wear with use. If your equipment is not starting when using t...
Bushing
$12.50
In Stock
Part Number: FIX10183438
This part includes one bushing for a miter saw. This bushing is sourced right from the original manufacturer and helps to fasten the blade to the shaft/spindle. If the blade of your miter saw is wobbling, this is one of ...
Kerf Plate
$29.67
In Stock
Part Number: FIX16687705
This replacement part is specially designed for Dewalt compound miter saws. It is supplied directly from original equipment manufacturer. Kerf boards, also known as kerf plates are used to prevent excessive splintering. ...
Belt Cover
$25.02
On Order
Part Number: FIX10181975
This is a genuine OEM sourced replacement belt cover designed for use with Dewalt miter saws. It helps to cover the belt and protect is as well as the user. It is made out of plastic and it is sold individually. To com...
Kerf Plate
$12.72
In Stock
Part Number: FIX10171806
This is a kerf plate, also sometimes referred to as a kerf board. This authentic replacement part is sold individually. You will need add two to your cart to complete the set. This part is made of plastic, is yellow in c...
Ball Bearing
$7.92
In Stock
Part Number: FIX10180911
This part includes one OEM ball bearing. This ball bearing is sealed on both sides. They are designed to minimize friction between moving parts and evenly distribute weight. Bearings are a general wear part that require ...
Dust Bag
$27.80
In Stock
Part Number: FIX10186865
This is an authentically sourced dust bag for a miter saw. It includes the fabric dust bag, a wire bag support, and the plastic fitting to attach it to your equipment. It also has a zipper to make emptying it quick and e...
Drive Pulley
$19.68
In Stock
Part Number: FIX10186994
A genuine item that is supplied directly from the original equipment manufacturer for use with DeWALT miter saws. It is an identical replacement for a missing or damaged drive pulley which was originally installed on the...
Belt
$19.02
In Stock
Part Number: FIX10166832
This is a genuine manufacturer-sourced component which is specially made for DeWALT saws. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. The purpose of the part #153...
Ball Bearing
$40.20
In Stock
Part Number: FIX10169633
This genuine manufacturer approved bearing is used to secure spindle and gear that drive the saw blade. It is designed to minimize the friction, over time bearing will begin to fail compromising units functionality. At t...
Bearing
$6.25
In Stock
Part Number: FIX10170786
This needle bearing is open on one side and closed on the other. This genuine DeWalt replacement part is sold individually. • Ball bearings minimize friction between rotating parts in your tool. The balls or roller...
Handle Set
$30.75
In Stock
Part Number: FIX10182526
This replacement handle set is specially designed for use with Dewalt compound miter saws. It is a genuine part that is supplied directly from original equipment manufacturer. This plastic handle is used to safely operat...
Wrench
$12.42
In Stock
Part Number: FIX10181217
This is a Genuine OEM replacement part used on Dewalt Miter Saws. This Wrench allows you to secure or remove a Saw Blade. Angular profile of this item makes tightening/loosening the Clamp Bolt easy. This wrench is made f...
Spiral Retaining Ring
$6.25
In Stock
Part Number: FIX10166897
This is a genuine OEM sourced replacement part designed for use with Dewalt miter saws. This is the spiral retaining ring for the drive pulley. It is made out of metal and it is sold individually. To replace it you would...
Armature Assembly
$212.95
In Stock
Part Number: FIX10188717
This authentic item is supplied directly from the original equipment manufacturer for use with DeWALT miter saws. The armature assembly attaches to the field & case. When replacing this part a screwdriver, a socket set, ...
Ball Bearing
$11.03
In Stock
Part Number: FIX10180912
This is an authentic replacement part constructed by the original manufacturer. It is used in DeWALT power tools, including miter saws. Ball bearings are used to buffer moving metal parts. This protects them while also c...
Needle Bearing
$8.63
In Stock
Part Number: FIX10171417
Gasket
$8.63
On Order
Part Number: FIX10171370
An authentic manufacturer sourced replacement part that is specially produced for use with Dewalt miter saws. This is the gasket that is used to create a seal for the gear case assembly. Over time gaskets may get compres...
Kerf Board
$10.30
In Stock
Part Number: FIX10181978
This is an authentic manufacturer sourced replacement part used on Dewalt compound miter saws. Kerf boards (also called kerf plates) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong k...
Wrench Holder
$6.25
In Stock
Part Number: FIX10171391
This is an authentic DeWalt replacement part sourced from the original manufacturer for use with miter saws. The metal wrench holder is commonly used to store the blade wrench onboard of the miter saw. This wrench holder...
Affresh Dishwasher Cleaner Tablets - 6
$22.00
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Affresh Washing Machine Cleaner - 3 pack
$19.89
Special Order
Part Number: FIX1960673
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Produce Preserver Filter
$17.80
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Washing Machine Cleaner Tablets – 6 Count
$27.76
In Stock
Part Number: FIX12345661
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
Refrigerator Deodorizer
$30.85
In Stock
Part Number: FIX12739141
Refrigerator deodorizers help to reduce bacteria growth and therefore reduce smells and extend the life of food.
Affresh Ice Machine Cleaner
$26.73
In Stock
Part Number: FIX12583750
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less
Brush
$ 20.63
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.