10122186-1-M-Milwaukee-22-18-0580-Carbon Brush and Spring (2 Required)
Part Location Diagram of 22-18-0580 Milwaukee Carbon Brush and Spring (2 Required)
See part 34 in the diagram
10122186-1-S-Milwaukee-22-18-0580-Carbon Brush and Spring (2 Required) 360 view
( Grid squares measure 1x1 inch )
10122186-1-S-Milwaukee-22-18-0580-Carbon Brush and Spring (2 Required) 10122186-2-S-Milwaukee-22-18-0580-Carbon Brush and Spring (2 Required) 10122186-3-S-Milwaukee-22-18-0580-Carbon Brush and Spring (2 Required) 10122186-1-S-Milwaukee-22-18-0580-Carbon Brush and Spring (2 Required) 360 view
Part Location Diagram of 22-18-0580 Milwaukee Carbon Brush and Spring (2 Required)

Carbon Brush and Spring (2 Required) 22-18-0580

$ 10.87
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10122186
Manufacturer #:
22-18-0580
Manufactured by:
Milwaukee

Product Description

This is a genuine manufacturer-sourced part which is specially made for use with Milwaukee sanders. Carbon brushes are one of the most commonly replaced power tool components. The purpose of a brush is to conduct the current in an electric motor. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. Keep in mind this high-quality part includes one durable carbon brush with an attached lead wire and the spring. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

  • Works with the following brands:
    Milwaukee
  • Works with the following products:
    Belt or Drum Sander