Part Location Diagram of A200378 Powermate Drag Bar, Three Hole
See part C-16 in the diagram
( Grid squares measure 1x1 inch )

Drag Bar, Three Hole A200378

$ 38.79
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10105682
Manufacturer #:
A200378
Manufactured by:
Powermate

Product Description

This is an authentic Powermate replacement part that has been sourced from the original manufacturer to be used with rear tine tillers. The metal drag bar fits into the swing plate at the back of the tiller. The drag bar digs into the ground behind the tiller to prevent the tiller from moving forward too quickly from the action of the tines. The drag bar has three holes for different depth settings and is sold as a single replacement part.