Watch the install video
10093066-1-M-Ridgid-089100303004-Switch
Part Location Diagram of 089100303004 Ridgid Switch
See part B25 in the diagram
Replacing your Ridgid Miter Saw Switch
( Grid squares measure 1x1 inch )
10093066-1-S-Ridgid-089100303004-Switch Part Location Diagram of 089100303004 Ridgid Switch Replacing your Ridgid Miter Saw Switch

Switch 089100303004

$ 32.71
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10093066
Manufacturer #:
089100303004
Manufactured by:
Ridgid

Product Description

This item is sourced from the original manufacturer. It is an authentic part used in Ridgid compound miter saws. It is designed to control on/off function of a saw. To start the tool, depress switch interlock button with right thumb or palm of either hand and then squeeze the trigger. Release the trigger to stop the miter saw. Install padlock through the hole in the trigger to prevent unauthorized use. Mechanical switches tend to break with time, eventually requiring replacement. Please note the actuator switch/button is sold separately. To replace this switch you will need a Phillips head screwdriver. • First make sure to unplug the saw • Remove screws from the handle/housing • Separate two (2) halves of the housing • Disconnect wires and the button from the switch • Remove old switch and secure new one in place • Reassemble in reverse order and test the equipment

  • Works with the following brands:
    Ridgid
  • Works with the following products:
    Miter Saw, Saw