10022820-1-M-Black and Decker-90552433-01-Filter
Part Location Diagram of 90552433-01 Black and Decker Filter
See part 4 in the diagram
10022820-1-S-Black and Decker-90552433-01-Filter 360 view
( Grid squares measure 1x1 inch )
10022820-1-S-Black and Decker-90552433-01-Filter 10022820-1-S-Black and Decker-90552433-01-Filter 360 view
Part Location Diagram of 90552433-01 Black and Decker Filter

Filter

Works With Model BDH2000PL!
$ 5.02
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10022820
Manufacturer #:
90552433-01
Manufactured by:
Black and Decker
Works With Model BDH2000PL!

Product Description

This is a genuine Black and Decker replacement part. This filter works to collect any dust, dirt, and debris not caught by the pre-filter. This filter is commonly use with handheld portable vacuums. If your filter is clogged or dirty your equipment will not run as smooth, it might lose suction, and you risk damaging the motor. The frame is made of plastic and the filter is made of pleated paper, for maximum surface area. These filters can only be cleaned a few times before they should be replaced. The dimensions of this replacement part are 3.37 inches high by 3.31 inches wide by 3.64 inches deep. This filter is sold individually, the pre-filter is sold separately.

  • Works with the following brands:
    Black and Decker
  • Works with the following products:
    Leaf Blower / Vacuum, Hand Vacuum
  • Part# 90552433-01 replaces these:
    P90552433-01