Eureka Parts

Fix Number

FIX12164504

Manufacturer Part Number

E-60844-5

This is a genuine OEM replacement part used in various upright vacuums. A disturbulator is held inside the nozzle, and sits directly in the suction airflow path. It spins when the vacuum is in use, allowing the bristles to agitate carpets and upholstery. This loosens dirt and debris for a more thorough clean than could be achieved with suction alone.

Fix Number

FIX17016363

Manufacturer Part Number

E-52282-4

This is a genuine OEM part designed for various types of vacuums. It is made to be used with the metal disturbulator tube (commonly called a brushroll), sliding out of place for easy cleaning or repair. These bristles are designed to agitate the fibers of carpets and upholstery in order to loosen dirt, offering a more thorough clean than suction alone. Two strips are included; one is 6" long and one is 4-1/2" long.

Fix Number

FIX12029208

Manufacturer Part Number

68465

Fix Number

FIX12164517

Manufacturer Part Number

E-60990-2

This genuine manufacturer-approved replacement dusting brush is specially produced for use with Eureka and Sanitaire upright vacuums. It is an accessory that is attached to the crevice tool to assist in picking up the material. This high-quality plastic component is sold individually.

Fix Number

FIX12164334

Manufacturer Part Number

E-39134-6

This is a genuine manufacturer-sourced component which is specially made for use with Eureka and Sanitaire vacuums. It is a high-quality replacement for a missing or a faulty carpet nozzle and elbow attachment that was included with a new unit. Please make sure to refer to the owners manual of your model for the correct application of this part. Keep in mind this high-quality attachment is made of durable plastic and is sold individually.

Fix Number

FIX12164401

Manufacturer Part Number

E-54506-1

It is a genuine component that is supplied by the original manufacturer for use with Eureka and Eureka upright vacuums. This is an identical replacement for a missing or a faulty upholstery nozzle assembly that was included with a new unit, please make sure to refer to the owners manual of your model for the correct application of this part. Keep in mind it is a high-quality assembly is made of durable plastic and is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX12164783

Manufacturer Part Number

E-76464

This is an authentic Hoover made replacement part. It is compatible with Hoover vacuums, including editions of the WindTunnel 2. This on-off switch is made of plastic material and is sold individually. A Philips head screwdriver and needle nose pliers are needed for this repair. During repair, access both the front and back of the machine. • Unplug the vacuum • Detach the handle • Remove bag housing door from front of machine • Remove all attachment tools in the front storage caddy • Remove tool caddy • Gently remove wires attached to old on-off switch • Pry out old switch • Push in new switch and attach wires • Test vacuum before reassembling

★★★★★

★★★★★

1 Review

Fix Number

FIX12164630

Manufacturer Part Number

E-62228-4

This genuine OEM supplied replacement part is designed to fit Sanitaire upright vacuums. Spinning motion of this brush help to pick up dust and debris. Over time bristles on rotating floor brush will wear down requiring replacement. This part is made out of plastic and it is sold individually. To complete this repair your would need a screwdriver. • Make sure the unit is unplugged • Lower handle to floor • Remove three screws to remove the hood/cover • Lift left end of brush roll • Remove and discard old brush roll • Place new brush roll around motor shaft • Place belt around brush roll pulley • Align left end cap with base and push it securely into place • Push right end cap into base until it snaps into place • Rotate brush roll by hand two full rotations to properly position belt • Re-assemble and test the unit

Fix Number

FIX17016362

Manufacturer Part Number

E-54104-1

This is an OEM part produced by the original manufacturer. A disturbulator is also known as a brushroll. It features a spiraling row of bristles designed to agitate carpet and fabric fibers, which loosens dirt particles in order to clean thoroughly. This part fits in the main suction head. This five-piece assembly includes one brushroll disturbulator, two Cap Bearings (part # 38138), and two Cap Covers (part # 26059A).

Fix Number

FIX12164728

Manufacturer Part Number

E-72953

This is an authentic OEM replacement part used with canister vacuums. This is a sturdy black plastic telescopic wand. It is compatible with 1-1/4" diameter accessories. Included is a two-piece wand assembly.