10110409-1-M-Porter Cable-865344-Chuck
Part Location Diagram of 865344 Porter Cable Chuck
See part 33 in the diagram
( Grid squares measure 1x1 inch )
10110409-1-S-Porter Cable-865344-Chuck Part Location Diagram of 865344 Porter Cable Chuck

Chuck 865344

$ 39.97
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10110409
Manufacturer #:
865344
Manufactured by:
Porter Cable

Product Description

This is an original part from Porter Cable for use with Drills. The chuck holds the bit in place. The most common reasons for replacing the chuck is if the drill bits are slipping or falling out of the chuck, the chuck won't open or close, the chuck jaws (teeth) are damaged, the chuck seized onto the spindle or the chuck is difficult to rotate. This part is sold individually. The tools that you will need to replace the chuck is a Torx driver (#20), large Allen wrench and a hammer.

  • Works with the following brands:
    Porter Cable, Milwaukee, DeVilbiss
  • Works with the following products:
    Electric Drill, Boring Machine