Black and Decker Electric Drill Cord Protector 330005-01 | Fix.com

Cord Protector

&SeePartX&
Cord Protector – Part Number: 330005-01
https://fixcom.azureedge.net/Schematics/Black and Decker/1042_Type_101_WW.gif
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
This is a cord protector, but it is also called a strain relief, and it is used with multiple power tools. This part is made of firm rubber to protect the cords from being pulled out or exposed, which would be a safety hazard. Over time the strain relief can develop cracks and break into pieces. This part is black and 4 inches long. The smallest end has a diameter of 0.5 inches. When completing this repair tuck in all wires to avoid pinching.
This part works with the following brands:
This part works with the following products:
Electric Drill, Angle Grinder, Reciprocating Saw, Sander Polisher, Hammer Drill, Jig Saw, Nibbler & Shears, Orbital or Palm Sander, Impact Driver, Chop Saw, Glue Gun, Band Saw, Cordless Drill, Biscuit Joiner, Router, Circular Saw, Dust Collector, Multi-Tool, Planer Jointer, Hammer.

Installation Videos

Replacing your Black and Decker Electric Drill Cord Protector
Watch this how to video with simple, step-by-step instructions for a successful DIY repair.

Installation Instructions

Showing 1-1 of 1 Instructions

Did not come with grinding disc guard

While unit was unplugged I screwed clamp of guard around grinder.

Were these instructions helpful?

1 of 4 people found these instructions helpful
Parts Used: Trigger Switch , Power Cord - 8', 18 Gauge, 2-Wire , Cord Protector , Paddle , Cord Guard / Strain Reliever , Cord Guard / Strain Reliever , Power Cord - 8', 18 Gauge, 2-Wire , Switch , Dust Cover F/AC/DC Switch , Pin 6 , Wheel Guard Assembly 7" , Toolless Wheel Cover, GA9040S
Difficulty Level: Very Easy
Total Repair Time: Less than 15 mins
Tools: Screw drivers
Customer: John from Hancock, MI
Showing 1-1 of 1 Instructions