Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
April 4, 2022
How do I check continuity on a timer. I removed it from the bulk
Head. What terminals do I use to check continuity?
For model number WGD5000DW3
Hello Dan, thank you for contacting us. To test the timer, use your model's wiring schematic to find the terminals in the timer that control the timer motor, and use your multi-meter to check them. Touch the two probes of the volt-ohm meter to the contact points to be tested. There should be no continuity reading on the volt-ohm meter during the test. If there is a reading on the volt-ohm meter, the timer is faulty. We hope this helps.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Compatibility
This part works with the following models:
Fix Number: FIX11749833
Manufacturer Part Number: WPW10185992
1 Question and Answer
