This insert is sold individually. Knob not included. Knob is sold separately.
Works with the following brands:
Whirlpool, Kenmore, Maytag, Amana
Works with the following products:
Dryer, Washer, Washer Dryer Combo
Part# WP8536939 replaces these:
AP6012988, 8536939
Videos For installing this part.
Replacing your D-Shaped Knob Insert
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Matilda
April 23, 2022
Agitator moves back and forth maybe a half inch to inch, will not advance time from wash to spin or rinse no matter what wash setting it is on. This is a Maytag Commercial Washing Machine. Makes a clicking noise as it agitates a short distance than what it should be agitating.
For model number MVWC565FWS2
Hello Matilda, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the shift actuator, the gearcase, the drive motor and the belt. Inspect the belt for any visible damage, and you can test the other parts with a multimeter. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
During a recent move, the Fabric Select knob was broken off, along with the plastic stem connecting the knob with the selection switch.
Unplug the washer. Pull off the old knob, if it is still attached. Remove two recessed screws and two hex screws from the back of the control panel. Flip the panel up. Pull the plastic clip holding the switch up, and pull the switch assembly off the panel. Gently pull the three sets of wires from the old switch, and push them onto the new one. Insert assembly into panel, applying pressure until the clip clicks into place. Flip panel back over and align. Replace the four screws.
