Electric Control Board W10802078
Works With Model WGD7300DC2!
$239.98
In Stock
- Fix Number:
- FIX11703454
- Manufacturer #:
- W10802078
- Manufactured by:
- Whirlpool
Works With Model WGD7300DC2!
Product Description
-
Works with the following brands:Whirlpool
-
Works with the following products:Dryer
-
Part# W10802078 replaces these:W10691551
- Works with the following brands:
- Whirlpool
- Works with the following products
- Dryer
- Part# W10802078 replaces these:
- W10691551
Part Number Cross Reference
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hollon
July 5, 2022
Hi, I have a whirlpool wed7300dw0. I get en e1 f3 error which indicates the thermistor. I replace the the thermistor, thermal fuse, checked the resistance of the thermistor and the continuity of the wiring harness. All venting is clear. I also ran the diagnostic checks on the acu listed in the service manual inside the dryer. I still get an e1 f3 error. Is it logical the control board is the issue here?
Thank you
For model number wed7300dw0

Hi Hollon,
Thank you for your question. Try resetting the dryer. Turn the circuit breaker off for one minute. When you turn it back on, start a time dry cycle and monitor the dryer for one minute to see if the code reappears. If it does, and you have already checked the thermistor and the wiring and cleaned the vent, you will need to replace the electronic control board. To test if the vent is clear, disconnect the dryer from the vent and run a cycle. If the dryer runs and the error does not appear, then you need to give the vent a thorough cleaning. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Model Compatibility
This part works with the following models:
Fix Number: FIX11703454
Manufacturer Part Number: W10802078
Manufacturer Part Number: W10802078
| Brand | Model Number | Description |
|---|---|---|
| Whirlpool | WED7300DC1 | Dryer - ELECTRIC DRYER |
| Whirlpool | WED7300DW0 | Dryer - ELECTRIC DRYER |
| Whirlpool | WED7300DW1 | Dryer - ELECTRIC DRYER |
| Whirlpool | WGD7300DC2 | Dryer - GAS DRYER |
| Whirlpool | WGD7300DW0 | Dryer - GAS DRYER |
| Whirlpool | WGD7300DW1 | Dryer - GAS DRYER |
| Whirlpool | WGD7300DW2 | Dryer - GAS DRYER |
| Whirlpool | YWED7300DW1 | Dryer |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.