Whirlpool/Whirlpool_Thumb/ONA6FTWU.gif
See part 21 in the diagram
( Grid squares measure 1x1 inch )

Timer - 230V 60Hz

$111.59
Fix Number: FIX11749827
Manufacturer #: WPW10185972
Manufactured by: Whirlpool

Product Description

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 5 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Robert from BOW, NH
    • Parts Used:
      WPW10185972
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Screw drivers
    No high heat drying
    Unplug dryer removed upper back panel. Pulled knob off timer. Removed screw under knob. Disconnected plugs on timer removed hold down screw replaced timer reconnect wire s install upper panel install screw under knob install knob pug in dryer works well
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      john from birmingham, AL
    • Parts Used:
      WPW10185972
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    dryer would not start
    called sears parts guy, he said thermostat nor high limit thermostat would cause dryer not to start. Had to be timer or door safety switch,. Checked door kill switch by sticking butter knife in switch. Got dizzy looking at blueprints. trying to trace down different functions of timer switch..Took timer switch off and shook it -- it rattled! Said a prayer and ordered new timer switch from this site New timer switch worked perfectly. Then I took apart old timer switch and realized one of the plastic cams had separated from timer dial. If you carefully take apart the timer switch it won't flop out and spring into a million pieces. It is a simple mechanical device with plastic innards, Dryer is working now. Wife happy, me happy. But I have the old timer on my list of things to repair if I retire and get bored.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Harry from Wethersfield, CT
    • Parts Used:
      WPW10185972
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Socket set
    dryer ran but no heat
    checked all parts for continuity everything checked out but timer would not work on fluff no heat so replaced that and it works gr8
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      JUAN from woburn, MA
    • Parts Used:
      WPW10185972
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Pliers
    Timer
    Well , it took me 3 times to figured it out because I didnt do enough research on youtube , I have replaced the heather element first and that wasnt it, then I replaced the thermostat that was bad but that didnt fix it either finally I saw a youtube video about how to test the timer and that was it, now I know for next time but it was an easy fix overall
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Mark from Capitol Heights, MD
    • Parts Used:
      WPW10185972
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver
    Dryer short cycled and would not heat up.
    Using a nutdriver I simply removed a total of eight screws, six from the rear of the top console, the two holding the timmer inplace. Disconnected the wires from the timmer. The small flathead screwdriver was used to disconnect the smallest of the wire plugs, by raising the housing just above the tab that locked the plug inplace. Installed the new timmer. Reconnected everything in the reverse. Took less then ten minutes and Dryer works like new! Tip: check with customer service to comfrim you are ordering the correct part number needed. You'll be glad you did.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX11749827
      Manufacturer Part Number: WPW10185972
      Brand
      Model Number
      Description
      Maytag
      4KMEDC100BQ1
      Dryer - ELECTRIC DRYER
      Amana
      4KNED4400BQ1
      Dryer - ELECTRIC DRYER
      Whirlpool
      4KWED4750BQ1
      Dryer - ELECTRIC DRYER
      Admiral
      AED4475TQ1
      Dryer - RESIDENTIAL DRYER
      Crosley
      CEDX631VQ1
      Dryer - Residential
      Estate
      EED4300VQ1
      Dryer
      Inglis
      IED4400VQ1
      Dryer - Residential
      Amana
      NED5100TQ1
      Dryer - RESIDENTIAL DRYER
      Roper
      RED4400VQ1
      Dryer
      Roper
      RED4440VQ1
      Dryer
      Admiral
      YAED4475TQ1
      Dryer - 29" ELECTRIC DRYER
      Whirlpool
      YEED4300VQ1
      Dryer
      Inglis
      YIED4400VQ1
      Dryer - Residential 29" Electric
      Roper
      YRED4340SQ2
      Dryer