Part Location Diagram of WPY304693 Whirlpool JUMPER WIR
See part 15 in the diagram
( Grid squares measure 1x1 inch )

JUMPER WIR WPY304693

★★★★★
★★★★★
1 Review

Rated by 3 customers 

?

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$9.92
In Stock
Fix Number:
FIX11757520
Manufacturer #:
WPY304693
Manufactured by:
Whirlpool

Product Description

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Peter from LEXINGTON, MA
Parts Used:
WPY304693
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Old Jumper Burned Through
First you have to remove the front panel. Then the jumper can be attached without removing anything, but I found it easier to take out the heating element
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Sweeden, KY
Parts Used:
WPY304693
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Dryer runs but does not dry....Jumper wire burnt into from thermal safety switch to heater terminal.
Remove the front cover by removing the two bottom screws, and also discnonect door switch Disconnect jumper from the thermal safety switch using pliers(this is a slide lug connection). Next remove the nut from the Heater terminal. Remove old burnt jumper and replace, using instructions in reverse. Replace front cover making sure that you rewire the door switch.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ivy from Cooksville, MD
Parts Used:
WPY304693, WP306604, WP303396, Y304596
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
no heat from dryer
Removed the from panel from the dryer unit. Although we replaced the 4 items listed above, the main cause of the problem was the heating element thermal insulator. Upon removing the front panel and inspection we noticed the heating element was cracked/broken, Actually there were two of them, so we reordered another and replaced them bo th. they look like a copper screw with a collar and a ceramic head. Once these were replaced the dryer worked fine.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11757520
Manufacturer Part Number: WPY304693
Brand Model Number Description
Maytag BDE7500 Dryer - Residential
Maytag DE106 Dryer - Electric
Maytag DE107 Dryer - Electric
Maytag DE110 Dryer - Electric
Maytag DE18CA Dryer - Electric
Maytag DE18CM Dryer - Electric
Maytag DE18CT Dryer - Electric
Maytag DE19CA Dryer - Electric
Maytag DE19CD Dryer - Electric
Maytag DE19CS Dryer - Electric
Maytag DE19CT Dryer - Electric
Maytag DE210 Dryer - Electric
Maytag DE212 Dryer - Residential
Maytag DE21CA Dryer - Electric
Maytag DE21CM Dryer - Electric
Maytag DE21CS Dryer - Electric
Maytag DE21CT Dryer - Electric
Maytag DE22CA Dryer - Electric
Maytag DE22CS Dryer - Electric
Maytag DE22CT Dryer - Electric
Maytag DE23CD Dryer - Electric
Maytag DE24CA Dryer - Electric
Maytag DE24CM Dryer - Electric
Maytag DE24CS Dryer - Electric
Maytag DE24CT Dryer - Electric
Maytag DE25CS Dryer - Electric
Maytag DE26CA Dryer - Commercial
Maytag DE26CD Dryer - Commercial
Maytag DE26CS Dryer - Electric
Maytag DE26CT Dryer - Commercial