Maytag/Maytag_Thumb/1UWBSRZ4.gif
See part 10 in the diagram
Replacing your Kenmore Dryer Dryer Blower wheel play video
( Grid squares measure 1x1 inch )

Dryer Blower wheel

★★★★★
★★★★★
1 Review
$ 34.87   In Stock
Fix Number: FIX11743785
Manufacturer #: WP694089
Manufactured by: Whirlpool

Product Description

The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.

Videos For installing this part.

Replacing your Dryer Blower wheel

Replacing your Dryer Blower wheel play video

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.7 / 5.0, 6 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Roland H from Auburn, ME
    • Parts Used:
      WP694089, 341241, 279827
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Wrench (Adjustable), Wrench set
    Squealing noise when running, bad motor bearing; needed new motor.
    The instructional videos that this site provides are really great and most helpful. If changing a motor or blower, it will tell you to hold the motor shaft while loosening the blower, (CAUTION: left hand thread). Those instructions would be great for a dryer that is almost new but the likelihood of needing to change the motor or blower wheel on a fairly new dryer would be slim. Because my dryer was not new, as I suspect most needing repairs aren't, I ended up doing what most everyone else had to do and that is,cut the shaft that extends into the blower wheel because that blower wheel absolutely refuses to break free from the motor shaft, most likely because it's seized onto the shaft, probably caused by years of moist air in the blower tunnel, (too bad the factory doesn't put a dab of Never Seize on the threads before assembling it when new). In any case, if you determine that you need a new motor, do yourself a favor and order a new blower wheel at the same time, then plan on cutting the old one off if it fails to budge on your first attempt. I used a Milwaukee M12 Hackzall, which is their smaller mini cordless reciprocating saw, with a 6" blade. A six inch blade is just long enough that it will flex, allowing the space required to get in between the blower and the end of the motor. You might be able to get a full size reciprocating saw in there although it will be tougher. Be careful not to destroy the felt seal on the cabinet wall that keeps the lint out of the main cabinet. Once the motor and blower are free of each other, the rest is simple and quick. If I spent two and a half hours completing the repair, 90% of that was trying to unscrew the blower from the motor. This site is great to do business with, from their large inventory, to their great web site, service, and delivery. Great company!
    6 of 7 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Scott from OWASSO, OK
    • Parts Used:
      WP694089
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
    My dryer was making a high speed grinding and clattering noise
    Found a video that showed how to disassemble dryer and replace the blower wheel. It was very helpful. Hardest part was removing the back clip that holds the motor down. Video shows the guy prying on it with a screwdriver but Vice grips worked much better. Once the clip came off it was easy. Video showed using Vice grips to grip the motor shaft so you can use crescent wrench to loosen the blower wheel from the shaft. It also showed It was left-hand thread. Had to remove the back of the dryer and the dryer duct to expose the blower wheel from the back. Unscrewed it and found a broken blade from the wheel caused by an ink pen that had lodged in there. Cleaned out all the broken pieces and replaced the wheel. Putting it back together was easy. Discovered the screwdriver works best putting the clip back on the back of the motor instead of pliers like the video showed. Video was very helpful explaining how to do it tho. Be sure to lube the drum roller bearings before you put the drum back in. Putting the belt back on was a bit of a chore but doable if you can lay on your side and get both hands in there to do it. Video was very helpful with that. I would recommend squeezing the clips a little tighter with vice grips before putting the front panel back on as they tend to fall off while you're trying to get that thing back into position tho. They kept falling off back into the floor of the dryer. Works great now and should last another 5 years if I can remember to clean out my pockets
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Paul from Peoria, AZ
    • Parts Used:
      WPW10463866, WP694089, 4392065
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
    Bad motor and drum belt.
    Open the top of the washer with a flat screwdriver it pries open. Removed the top two 5/16 screws from the inside of the front panel and removed the front panel, It has no screws at the bottom. Then remove four 1/2 nuts from the drum panel and remove the drum panel. Take the drum belt off of the drum and remove the drum. Remove the motor by unplugging the one big wire plug and two single blue wires. Be sure to take note of the location that each of the blue wires came from. The blower fan on the outside end of the motor unscrews clockwise and the motor is held in place with two clips. One on each side of the motor. The two drum rollers are each held on with a bolt in the center of them. After the motor is in place the new blower fan is threaded on counter clockwise on the motor shaft. Put the blower fan cover panel back on and reassemble the dryer. make sure the drum belt is in alignment with the motor pulley Also make sure the drum felt around the drum is not folded or torn and reinstall the drum panel. Spin the drum to check for metal on metal and or drag from roller alignment. Reinstall the front panel and close the top of the dryer.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      David from Hershey, PA
    • Parts Used:
      WP694089
    • Difficulty Level:
      Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Nutdriver, Screw drivers, Wrench (Adjustable)
    Loud vibration
    I first had to diagnose the source of the vibration and upon taking it all apart, discovered that one of the blades on the blower wheel had broken off. I was skeptical that a missing blade would cause such a loaud vibration, but the problem was entirely resolved with the new part.
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      William from Powell, OH
    • Parts Used:
      WP694089
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
    Could not detach blower wheel from motor shaft
    Recommend anyone replacing motor on machine older than 5 years to order blower wheel up front. Wheel housing is plastic and gets brittle with age resulting in stripping of wrench surface or cracking when attempting to detach. I ended up accessing to blower wheel from the back of the machine and using. A 1" hole saw to cut the hub from the motor shaft. After that all was a piece of cake.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Katinka from Hillsborough, NC
    • Parts Used:
      WP694089
    • Difficulty Level:
      Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
    Broken blades on the blower wheel made a terrible noise
    I followed the t Youtube instructions with no problem until I got to the part where you have to use two adjustable wrenches to begin unscrewing the blower wheel. My machine is very old so the blower wheel was very stuck! I stripped the corners of the plastic blower wheel, finally having to use locking pliers to get enough grip. Because it was hard to see, I did not realize when I began, that I was gripping on the end of the blower wheel itself; I thought it was a bolt. Had I unwrapped my new blower wheel first, I might have realized this. My 30 year old machine is purring again. This is my second time using this site instructional videos. They are the best and have saved me lots of money!
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating: (1 Review)
      5.0
      ★★★★★
      ★★★★★
      Filter By Rating:
      • 5
        1
      • 4
        0
      • 3
        0
      • 2
        0
      • 1
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Compatibility
          This part works with the following models:
          Fix Number: FIX11743785
          Manufacturer Part Number: WP694089
          Brand
          Model Number
          Description
          Kenmore
          10686294140
          Dryer
          Kenmore
          10686294340
          Dryer
          Kenmore
          10686294540
          Dryer
          Kenmore
          10686294740
          Dryer
          Kenmore
          10686294840
          Dryer
          Kenmore
          11060012000
          Dryer
          Kenmore
          11060012001
          Dryer
          Kenmore
          11060012002
          Dryer
          Kenmore
          11060022010
          Dryer
          Kenmore
          1106012510
          Dryer - ELECTRIC DRYER
          Kenmore
          1106012990
          Dryer - Kenmore Dryer Model 110.6012990 (1106012990, 110 6012990) Parts
          Kenmore
          11060172000
          Dryer
          Kenmore
          11060172001
          Dryer
          Kenmore
          11060172002
          Dryer
          Kenmore
          11060202990
          Dryer
          Kenmore
          11060212990
          Dryer
          Kenmore
          11060222511
          Dryer - ELECTRIC DRYER
          Kenmore
          11060232000
          Dryer
          Kenmore
          11060232001
          Dryer
          Kenmore
          11060232002
          Dryer
          Kenmore
          11060522900
          Dryer
          Kenmore
          11060602990
          Dryer
          Kenmore
          11060612990
          Dryer
          Kenmore
          1106062110
          Dryer
          Kenmore
          11060622990
          Dryer
          Kenmore
          11060702990
          Dryer
          Kenmore
          11060712990
          Dryer
          Kenmore
          1106072011
          Dryer - ELECTRIC DRYER
          Kenmore
          11060722990
          Dryer
          Kenmore
          11060724990
          Dryer