Blower Wheel WE16M15
$74.09
In Stock
- Fix Number:
- FIX960003
- Manufacturer #:
- WE16M15
- Manufactured by:
- GE
Jump to:
Product Description
This wheel attaches to the motor.
-
Works with the following brands:General Electric, Hotpoint, Whirlpool, Kenmore
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy
-
Part# WE16M15 replaces these:AP3794635, 1089096, WE16X0017, WE16X0027, WE16X0030, WE16X17 ... Show more , WE16X27, WE16X30, WE1X306 Show less
- Works with the following brands:
- General Electric, Hotpoint, Whirlpool, Kenmore
- Works with the following products
- Dryer
- Fixes the following symptoms
- Noisy
- Part# WE16M15 replaces these:
- AP3794635, 1089096, WE16X0017, WE16X0027, WE16X0030, WE16X17, WE16X27, WE16X30, WE1X306
Part Number Cross Reference
Videos For installing this part.
Replacing your Blower Wheel
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Blower Wheel fins grinded away in the middle
Safety first (unplug dryer), removed front panel door screws at top (2 ea) using "ph2 bit". I used "S2 bit" for the 2 ea. screws holding panel door and set top cover and panel door aside. Removed belt from motor pulley, and lay drum aside as well. Next, I unscrewed the 2 ea. long bolts and 3 ea. screws (front) from the frame holding the m
... Read more
otor. I unplug the three wires (white, black, yellow) connected to the panel door using "needle nose pliers". I unscrew the two bolt/screws holding the motor in place. Pulled the motor back to expose the "blower wheel", use 3/8" nut socket to remove and install new clamp and screw. To remove the "blower wheel", I just gently rocked it back and forth until it came off, which was easy since it was worn. *Prior to installing the new blower wheel, I made sure the "slotted side" align with the slot on the motor shaft. Then I gently tap it with a small rubber mallet into place. Also, I notice how the clamps were facing so they could be installed correctly, which I did. Once I install the new "blower wheel w/new clamps", I just "reversed" the process of putting things back together and took my time (didn't take long). Plug the dryer in to the wall socket, set the timer, turned it on and what do you know, "NO MORE GRINDING NOISE"! Peace, to the ears. It took me close to an hour to complete, because I took my time. I'm sure I could have done it quicker, but when you're "retired", time is on your side.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX960003
Manufacturer Part Number: WE16M15
Manufacturer Part Number: WE16M15
Brand
Model Number
Description
Kenmore
363DDE8509RCMA
Dryer
- Kenmore Dryer Model 363.DDE8509RCMA (363DDE8509RCMA, 363 DDE8509RCMA) Parts
Kenmore
363DDE8509RCMW
Dryer
- Kenmore Dryer Model 363.DDE8509RCMW (363DDE8509RCMW, 363 DDE8509RCMW) Parts
Kenmore
363DDE9600RCMA
Dryer
- Kenmore Dryer Model 363.DDE9600RCMA (363DDE9600RCMA, 363 DDE9600RCMA) Parts
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.