Part Location Diagram of WE04X20089 GE Dryer Timer
See part 100 in the diagram
( Grid squares measure 1x1 inch )

Dryer Timer WE04X20089

Rated by 6 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$75.20
In Stock
Fix Number:
FIX9493080
Manufacturer #:
WE04X20089
Manufactured by:
GE

Product Description

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 6 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Donna from Thebes, IL
Parts Used:
WE04X20089, WE01X20376
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Timer Knob was cracked and timer part that the knob was attached to also broke
I had to take metal back off dryer to get to the timer. There are a lot of wires attached to the timer so you have to be sure you get them in the proper places when putting them on the new timer. I chose to take one wire off at a time with the needle nose pliers and attach in the proper place on the new timer. After placing all the wires to the new timer I inserted the timer back into position and added the knob put the back in place and return screws. Plug dryer back in. YOU SHOULD UNPLUG DRYER BEFORE STARTING REPAIR. Only takes about 20 minutes to do complete repair.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
SANDRA from Clyde, NC
Parts Used:
WE04X20089, WE01X20374, WH01X10106
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Replaced broken timer switch and knob.
Very easy fix. Parts were exactly what was needed.They arrived in the time frame promised. They were an exact fit. The online instructions were helpful! Will definitely use this site again.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from Hoover, AL
Parts Used:
WE04X20089
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Cycle selector/timer
Remove and replace
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Daytona Beach, FL
Parts Used:
WE04X20089
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
controller shaft had rounded off and knobs wouldn't work
Unplug dryer! remove back panel three phillips head screws and three 5/16 hex head screws. rotate timer CCW to remove it. It only needs to rotate short distance, being careful not to pull any wires off as some are very short. install the new unit by setting in place and rotating CW to lock in. Remove the wires from the old unit one at a time and install on new unit. Plug dryer in and give quick on test. Unplug again and install rear panel. Done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Covington, LA
Parts Used:
WE04X20089
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Timer went bad
Took off back cover - about 6 screws. Timer twisted out of clamps and leads taken off and new ones put on one at a time to make sure proper leads went back Easy. Took at most 5 minutes. Plugged dryer back in and toasted my success.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
cesario from mount sinai, NY
Parts Used:
WE04X20089
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
timer internal parts difficult to turn
removed three screws from back of control panel.turn timer to left to release from panel. reversed procedure to install timer after removing wires from defective timer one at a time and placed them on new timer. re installed 3 screws in back panel.all in all took about 15 minutes
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX9493080
Manufacturer Part Number: WE04X20089
Brand Model Number Description
General Electric DWSR483EG1CC Dryer - Electric
General Electric DWSR483EG1WW Dryer - Electric
General Electric DWSR483EG3CC Dryer - Electric
General Electric DWSR483EG3WW Dryer - Electric
General Electric DWSR483EG4CC Dryer - Electric
General Electric DWSR483EG4WW Dryer - Electric
General Electric DWSR483EG5CC Dryer
General Electric DWSR483EG5WW Dryer
General Electric DWSR483EG6CC Dryer
General Electric DWSR483EG6WW Dryer
General Electric DWSR483EG7CC Dryer
General Electric DWSR483EG7WW Dryer
General Electric DWSR483EG8CC Dryer
General Electric DWSR483EG8WW Dryer
General Electric DWSR483EG9CC Dryer
General Electric DWSR483EG9WW Dryer
General Electric DWSR483GG1CC Dryer - Gas
General Electric DWSR483GG1WW Dryer - Gas
General Electric DWSR483GG2CC Dryer - Gas
General Electric DWSR483GG2WW Dryer - Gas
General Electric DWSR483GG3CC Dryer
General Electric DWSR483GG3WW Dryer
General Electric DWSR483GG4CC Dryer
General Electric DWSR483GG4WW Dryer
General Electric DWSR483GG5CC Dryer
General Electric DWSR483GG5WW Dryer
General Electric DWSR483GG6CC Dryer
General Electric DWSR483GG6WW Dryer
General Electric DWSR483GG7CC Dryer
General Electric DWSR483GG7WW Dryer