Heat Detector WE4X448
Works With Model DDC6000MCL!
$71.35
In Stock
- Fix Number:
- FIX268031
- Manufacturer #:
- WE4X448
- Manufactured by:
- GE
Works With Model DDC6000MCL!
Jump to:
Product Description
Also known as Flame Sensor/Detector.
-
Works with the following brands:General Electric, Hotpoint, Whirlpool, Kenmore
-
Works with the following products:Dryer, Washer Dryer Combo
-
Part# WE4X448 replaces these:AP2042635, 2629, DE355
- Works with the following brands:
- General Electric, Hotpoint, Whirlpool, Kenmore
- Works with the following products
- Dryer, Washer Dryer Combo
- Part# WE4X448 replaces these:
- AP2042635, 2629, DE355
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drier would heat, run but after shutting off hot. Would not reheat.
Use downloadable diagram for number reference. I opened the unit by removing the 2 screws in the front top of door on the inside near #642. Then the two back brackets #452. Took the top off. I secured the whole top unit#13 because it was unnecessary to dissemble. And you would have to open it to take apart the electrical connections. I j
... Read more
ust tied it up to prevent stress on the wires. I took the front off by two screws on #393 the dryer case. You can disconnect the door switch easily. Next below has an access you can reach in and apply pressure to release the tension on the belt. Make a mental note of how the belt goes on as you have to put this on again by feel. Check if its time to replace belt also. Remove belt then drum. All other parts are in good access. I changed part numbers 729,731,550. Both solenoids gave a reading on the multi-tester. I am not sure if it was the solenoids or the heat detector in this case. But changing all three did the job. According to statistics the solenoids fail often for this problem. And changing both is recommended. Your in there so might as well switch them out (Your Call). I was able to reconnect the gas and the electrical and run the dryer to check the repair with the unit open. Reassembly is just the reverse. Wear gloves there are sharp edges, don't loose screws and brackets. Order numbers are WE4X692, WE4X693,WE4X448. I am not too mechanical but once I had the unit apart it made sense to me. Also make sure to clean out accumulated lint. I found much of it inside vacuumed the inside completely.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wasn't heating (or drying)
Our dryer is run 3-4 times a day (8 people in my family) so it is both essential and well used. I have done other repairs so I know my way around the inside. When the heat stopped, I did some research and found it was either the heat detector or the gas valves. As we needed to dry some clothes, I bought both. They are both located in
... Read more
the same area but the dryer has to be put back together to test them. I did the heat detector first. This requires removing the top panel, then front top panel, then the front and finally the side panel (Pro-Tip: when the front is removed the barrel doesn't have support. Shoving a shoe in-between the barrel and the frame will give it what it needs). Replacing the detector was simple. The wires snap on but are easy enough to just pull off. I put it back together and then it would start burning gas and not stay going. This is typical bad valve behavior, so I went back in and replaced those. Now it is drying faster than it has in years. I personally don't enjoy repair work, but I appreciate the fast shipping and accurate information on this site - it is working amazing again...
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JOHN from HAVERHILL, MA
- Parts Used:
- WE4X448
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
dryer had no heat
large disassemble of the unit but, after reassemble worked beautifully!! correct part & quick service Thanks
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX268031
Manufacturer Part Number: WE4X448
Manufacturer Part Number: WE4X448
| Brand | Model Number | Description |
|---|---|---|
| Kenmore | 26715321 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 2671532110 | Washer Dryer Combo - LAUNDRY CENTER |
| Kenmore | 2671532211 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 2671532212 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 2671532311 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 2671532312 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 2671532412 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 2671532413 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 36371542 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 36371542211 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| Kenmore | 36371542310 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| General Electric | 3637154241 | Dryer |
| Kenmore | 36371542410 | Washer Dryer Combo - HOME LAUNDRY COMBO |
| General Electric | 36371542411 | Washer Dryer Combo - GE Home Laundry Combo |
| General Electric | 63740118 | Dryer |
| General Electric | 63740119 | Dryer |
| General Electric | 64100119 | Dryer |
| General Electric | 64100129 | Dryer |
| General Electric | 64100139 | Dryer |
| General Electric | 64100149 | Dryer |
| General Electric | 64100159 | Dryer |
| General Electric | 64100169 | Dryer |
| General Electric | 64100179 | Dryer |
| Whirlpool | CADG265RAL | Dryer - Whirlpool Dryer Cadg265ral |
| Whirlpool | CADG265RBL | Dryer - Whirlpool Dryer Cadg265rbl |
| General Electric | CADG265RCL | Dryer - GE Dryer Model CADG265RCL Parts |
| General Electric | CGL2000R*119 | Dryer |
| General Electric | CGL2000R*178 | Dryer |
| General Electric | CGL2000R*179 | Dryer |
| General Electric | CGL2000RW169 | Dryer |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.