Have you ever purchased from us before?
Thank you for helping make our site better.
Manufacturer #: WE1X980 /
Manufactured by: GE /
Fix #: FIX267091
Manufacturer #: WE1X980 |
Manufactured by: GE |
Fix #: FIX267091
Super easy...just pulled off the cracked knob and replaced with the new knob.
Were these instructions helpful?
I started with a pair of channel locks turn the knob do in the position where I thought it should be then I took a little screwdriver and spread that little clip so I could remove it and then installed the new one with the new knob on it turned it to a setting hit the start button and I'm at work just like it was supposed to thank you for your speedy delivery and help me get to the destination I was trying to achieve again thank you very much for your help
I pulled old knob off and removed insert clip from post with pliers. Then pushed new knob on.
Very easy fix. Parts were exactly what was needed.They arrived in the time frame promised. They were an exact fit. The online instructions were helpful! Will definitely use this site again.
My husband did
First don't waste money on buying the D-Shaped Knob Insert Clip. The new knob comes with one already, If I knew this I could have saved money. It takes less than one minute to put the new knob on. Just line up the flat sides and slide it on. The plus side is now it works better than when it was brand new! guess it came with a faulty timer knob from the factory. The original knob was kinda hard to turn now its easy and smooth.
After dropping the top of the dryer I found the problem ordered the part and replaced the timer now working and like new.. Thank you..
The diagram is wrong!!!! The timer knob is much bigger. Had to have GE come out to get right part.
There was 3 screws on top back of dryer holding cover on. I removed the cover, unplugged the old timer, replaced cover, and was finished. Dryer runs great. Took a total of 10 minutes.
originally the know broke, then we used pliers to twist the timer until it broke. Fix was simple, removed 2 screws, tilted the control face forward, removed the old timer, pulled off the wires and replaced in exact position on new timer switch, replaced new timer, put back in the screws and put on the new knob. Like new.
Tired of the same workout and short on time? Incorporate jump rop…