Foam Seal WE1M825
$12.87
In Stock
- Fix Number:
- FIX2577674
- Manufacturer #:
- WE1M825
- Manufactured by:
- GE
Jump to:
Product Description
This is 39 inches long.
-
Works with the following brands:General Electric, Hotpoint, Whirlpool, Kenmore
-
Works with the following products:Dryer
-
Fixes the following symptoms:Noisy
-
Part# WE1M825 replaces these:AP4538345, WE01M0376, WE01X10217, WE1M376
- Works with the following brands:
- General Electric, Hotpoint, Whirlpool, Kenmore
- Works with the following products
- Dryer
- Fixes the following symptoms
- Noisy
- Part# WE1M825 replaces these:
- AP4538345, WE01M0376, WE01X10217, WE1M376
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bad Rear Bearing And Gaskets
Went on to your website and watched the video followed instructions word for word went great never worked on a dryer before this.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Ocean, NJ
- Parts Used:
- WE14X25080, WE09X27634, WE1M1067, WE1M825, WE03X29897, WE3M26, WE1M504
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Loud squealing sounds from worn drum bearing slides.
Followed the instructions on the video and removed 4 screws for the top and front. Removed all worn plastic parts as well belt for the drum. All finished in about 25 minutes. Very easy because of this website. I was ready to go buy a new dryer but instead replaced all wear parts inside and it runs like new.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from Stanley, VA
- Parts Used:
- WE09X27634, WE1M1067, WE1M825, WE3M26
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Front panel removal with dryers with control panel top and back
Actual repair shown and described by others.All appeared to describe front panel removal with dryers having control panel at top of front panel.My dryer had control panel on top at back.To remove front panel,open dryer door and remove two screws located in top of recess.This allows top removal and access to screws at top of side panels,al
... Read more
lowing removal of front panel.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX2577674
Manufacturer Part Number: WE1M825
Manufacturer Part Number: WE1M825
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.