GE/GE_Thumb/00123831i01.gif
See part 19 in the diagram
( Grid squares measure 1x1 inch )

Knob, Gray

$11.62
Fix Number: FIX2370714
Manufacturer #: WH01X10462
Manufactured by: GE

Product Description

If the timer knob on your dryer has become damaged and is o longer working, swapping out for a new one is a simple repair. This genuine OEM part is gray in color and fits onto a D-shaped shaft. This part includes the clip used to mount the knob. The assembly is sold individually, up to three knobs may be present on your dryer model.

Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.8 / 5.0, 12 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    George from CARDINGTON, OH
  • Parts Used:
    WH01X10462, WH01X10106
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
My timer knob on my dryer broke and would no longer work so I had to buy a new one and get the right products and the job went very smooth thank you for your help
I started with a pair of channel locks turn the knob do in the position where I thought it should be then I took a little screwdriver and spread that little clip so I could remove it and then installed the new one with the new knob on it turned it to a setting hit the start button and I'm at work just like it was supposed to thank you for your speedy delivery and help me get to the destination I was trying to achieve again thank you very much for your help
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Bruce from Omaha, NE
  • Parts Used:
    WE04X20416, WH01X10462
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Replace Timer (Old one would not work with knob - Timer Shaft Stripped)
Remove the dryer cord or shut off breaker, then take off all of the knobs from the appliance front, remove the six screws from the back, lift up keeper in lower right corner and twist out of place, move wires from old to the new timer, push thru hole in appliance front and twist into place. Replace the six screws, knobs, turn breaker back on or put cord back into place, test timer operation, and I was done in 15-20 minutes.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Darlene from Milford, PA
  • Parts Used:
    WH01X10462
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Old knob cracked
Put new know on d-shaped shaft
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Gloria from Fairview Park, OH
  • Parts Used:
    WE4M527, WH01X10462
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Dryer timer replacement
Easy job, but take your time and work carefully. Twist the old timer off keeping the wire connections. Twist on the new timer and transfer the wires one at a time. Wires are on tight so you might need pliers.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Wheeler from Deltona, FL
  • Parts Used:
    WE04X20416, WH01X10462
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
rotary switch broke
Open the box for the replacement part and plugged wire for wire and closed the cover back on and plugged into dryer outlet and it worked great
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    michael from flemington, NJ
  • Parts Used:
    WE4M527, WH01X10462
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
gas dryer wouldn't stay on for the required time
First unplug power cord. I removed three Philips screws at top rear of control panel and tilted it forward. Then facing front of machine slide panel to the right to free bottom tabs. Twist out timer switch counter clockwise by releasing the locking tab.Install new timer switch by rotating it clockwise. Then careful remove wires one at a time from old timer to new installed timer. I used a small screw driver to pry up wire connectors. Its much easier to swap wires one at a time so as not to get confused about location positioning. Then with all wires firmly in place place control panel bottom back into slots tilt in place reinstall three screws, plug power cord back in.JOB DONE
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Matt from Las Vegas, NV
  • Parts Used:
    WH01X10462
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Knob kept breaking, used pliers to turn timer and it got to hard to turn with knobs.
I'm probably average to slightly below average on the handyman scale so trying to switch out an electrical part on an appliance was a definite don't mess with, but reading a few other post convinced me to give it a try. It was as easy as everyone says, few screws in the back to get to the timer, unplugged the wires 1 at a time and plugged them into the new one so I wouldn't get mixed up. Screwed the back back on and dryer is like new. Thanks ! Matt
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Barbara from Lexington, KY
  • Parts Used:
    WH01X10462
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
Heat Selector On My Dryer Became Cracked And Did Not Work And Did Not Work
I simply put the new knob on and instantly I could select my dryer heat and the dryer ran fine. I also had delivery within 24 hours. Thanks.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Bill from Baltimore, MD
  • Parts Used:
    WH01X10462
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
replace dryer knobs
old knobs were cracked just pulled them off and installed the new ones....
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    cindy from fillmore, IN
  • Parts Used:
    WH01X10462
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
broken dryer knob
Replaced broken knob by pulling old one off and putting new one on.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX2370714
Manufacturer Part Number: WH01X10462
Brand
Model Number
Description
General Electric
DLLSR40EG0WW
Dryer - Electric
General Electric
DLLSR40EG1WW
Dryer - Electric
General Electric
DLLSR40EG2WW
Dryer - Electric
General Electric
DLLSR40EG3WW
Dryer
General Electric
DLLSR40EG4WW
Dryer
General Electric
DLLSR40EG5WW
Dryer
General Electric
DLLSR40EG6WW
Dryer
General Electric
DLLSR40GG0WW
Dryer - Gas
General Electric
DLLSR40GG1WW
Dryer - Gas
General Electric
DLLSR40GG2WW
Dryer - Gas
General Electric
DLLSR40GG3WW
Dryer
General Electric
DLLSR40GG4WW
Dryer
General Electric
DLLSR40GG5WW
Dryer
General Electric
DLLSR40GG6WW
Dryer
General Electric
DLLSR40GG7WW
Dryer
General Electric
DQSR483EG0WW
Dryer - Electric
General Electric
DQSR483GG0WW
Dryer - Gas
General Electric
DRSR483EG0WW
Dryer - Electric
General Electric
DRSR483EG1WW
Dryer - Electric
General Electric
DRSR483EG2WW
Dryer - Electric
General Electric
DRSR483EG3WW
Dryer
General Electric
DRSR483EG4WW
Dryer
General Electric
DRSR483EG5WW
Dryer
General Electric
DRSR483EG6WW
Dryer
General Electric
DRSR483EG7WW
Dryer
General Electric
DRSR483GG0WW
Dryer - Gas
General Electric
DRSR483GG1WW
Dryer - Gas
General Electric
DRSR483GG2WW
Dryer - Gas
General Electric
DRSR483GG3WW
Dryer
General Electric
DRSR483GG4WW
Dryer