( Grid squares measure 1x1 inch )

Timer Knob

Works With Model HTDX100ED0WW!

★★★★★

1 Review

Rated by 13 customers

Very Easy

Less than 15 mins

Ratings submitted by customers like you who bought this part.

$18.91

Fix Number: FIX1482196

Manufacturer #: WE1M652

Manufactured by: GE

Works With Model HTDX100ED0WW!

Product Description

If your current timer knob has become cracked or otherwise damaged, this is the replacement part you will need. This knob is meant for D-shaped shafts only. The timer knob allows you to select the amount of time your dryer will run for, so if broken can make setting the time and starting your dryer difficult. It is approximately 3 inches in diameter and is made of durable white plastic. No tools are required for this repair, just pull the existing knob straight off the shaft and install the replacement. Knobs are sold individually and are sourced from the manufacturer.
Works with the following brands

General Electric, Hotpoint
Works with the following products
Dryer
Part Number Cross Reference

Part# WE1M652 replaces these:

AP3995164, 1264289

1 Related Part Questions and Answers

13 Installation Instructions

1 Customer Review Model Compatibility

Product Description Questions and Answers Related Parts Installation Instructions Customer Reviews Model Compatibility

Product Description

If your current timer knob has become cracked or otherwise damaged, this is the replacement part you will need. This knob is meant for D-shaped shafts only. The timer knob allows you to select the amount of time your dryer will run for, so if broken can make setting the time and starting your dryer difficult. It is approximately 3 inches in diameter and is made of durable white plastic. No tools are required for this repair, just pull the existing knob straight off the shaft and install the replacement. Knobs are sold individually and are sourced from the manufacturer.

Works with the following brands:

General Electric, Hotpoint
Works with the following products:
Dryer
Part# WE1M652 replaces these:

AP3995164, 1264289

Questions and Answers

Be the first to ask our experts a question about this part!

Related PartsAdditional or alternate parts to consider.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 13 reviews.

< Prev
1
2
Next >

Sort by:

Customer:

William from MARYVILLE, TN
Parts Used:
WE4M416, WE1M652
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

My dryer would not start

Step 1. After unplugging the dryer from the wall outlet, Removed 6 screws holding the back cover of the instrument panel.
Step 2. Removed the start switch by gently twisting left and pulling out of the socket.
Step 3. Removed the three wires, one at a time and placed them on the new start switch, then installed the new switch in its socket by gently twisting to the right.
(Note: plugged power cord back in and tried the new Start Switch. Still would not start.)
Step 4. Removed the Timer Knob by pulling strait off the shaft, then replaced with the new knob. Pushed the Start button and the Dryer worked. The old knob was obviously stripped so as to slip on the Timer shaft, giving the impression it was moving but it was not.

7 of 7 people found this instruction helpful.