Frigidaire/Frigidaire_Thumb/JRVWEJIJ.gif
See part 15 in the diagram
Replacing your Frigidaire Dryer Heating Element Assembly play video
( Grid squares measure 1x1 inch )

Heating Element Assembly

$ 77.79   In Stock
Fix Number: FIX418120
Manufacturer #: 131553900
Manufactured by: Frigidaire

Product Description

This dryer heating and housing assembly has terminals at four o'clock. This E-line assembly comes with a felt strip and insulators already attached.

Videos For installing this part.

Replacing your Heating Element Assembly

Replacing your Heating Element Assembly play video

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 8 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Jimmy from Mullins, SC
    • Parts Used:
      134120900, 131553900
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    No heat
    Watched the provided video and followed the written diagrams for my model dryer.
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Mimi from Peoria, AZ
    • Parts Used:
      131553900
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    Our dryer stopped heating
    We started with the obvious, the heating element assembly. No problem at replacing it. But it still didn't work! So we then noticed that one of the prongs on the plug was burnt! So we replaced it and also the receptacle! That still didn't do it! So we went a little further and replaced the circuit breaker in the house box, and by golly, that did it! We appreciate the fact that we could go to you and start the process!! Our dryer is, of course like new!! So don't give up people!! Two heads are better than one! THX
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Frank from Miami, FL
    • Parts Used:
      131553900
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    NO HEATING
    WATCHED THE VIDEO PRIOR TO BEGINNING THE REPAIR. REMOVED ALL NECESSARY PARTS TO ACCESS THE HEATING ELEMENT ASSEMBLY, 15 MIN. REMOVED THE HEATING ELEMENT ASSEMBLY 1 MIN. VACUUMED LINT FROM ALL AREAS OF THE ENTIRE DRYER MACHINE INCLUDING THE LOWER LINT FILTER COMPARTMENT, 1 HOUR. INSTALLED THE NEW HEATING ELEMENT ASSEMBLY 1 MIN. REASSEMBLED ALL OTHER PARTS INCLUDING DRYER TOP, BACK, DRUM WITH BELT, 4" VENT TUBE, RECONNECTED WIRE PLUG-INS, IN LESS THAN 15 MINUTES. UPON STARTING THE FIRST NEW LOAD OF WET CLOTHES IN THE DRYER IT ONLY TOOK 20 SECONDS TO REALIZE THAT THE VENT IN THE WALL WAS CLOGGED EXTREMELY BAD. AT THAT POINT WE TURNED THE DRYER OFF AND DISCONNECTED THE VENT FROM THE DRYER TO THE WALL. WE CALLED MIAMI VENT PROS AND THEY PROFESSIONALLY REMOVED LINT FROM 27 FT OF A VERTICAL 4" VENT PIPE WITH 3 ELBOWS IN AROUND 2 HOURS. THE DRYER IS NOW WORKING LIKE BRAND NEW. VENT PROS RECOMMENDED AT LEAST A VENT CLEANING EVERY TWO YEARS.
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      James from Palm Coast, FL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    No Heat and error on front panel after about 2 minutes after running
    removed 2 rear screws, removed top panel. Removed 2 top screws and 2 internal screws, disconnected electrical connections and removed front panel. removed drum guide. Disconnected drive belt, removed drum. removed 4 screws from rear, removed the heating element assembly. Cleaned the entire bottom section of the dryer. Installed new heating element assembly, installed thermal limiter and control thermistor, reassembled the dryer. Dryer has been working great!
    1 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Ryan from Whitefish, MT
    • Parts Used:
      131553900
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Pliers, Screw drivers
    Lack of heat
    I followed the directions in the install video. Fail proof, I felt like I had a pro there with me. Took less time than the video said. Smooth operation no complaints.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Ronald from Boynton Beach, FL
    • Parts Used:
      134587700, 131553900
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set
    Dryer would not heat
    I used the online videos supplied by this site , which were extremely helpful for me in completing this repair. The hardest part of the whole repair was aligning the drum to the door opening. I removed the door from the front panel inorder to more easily hold and align the drum, which was one of the best thing I can pass onto others. I had to innovate in removing the door because of the minimal clearance involved. I used a small locking wrench with a screw nutdrive to remove and reinsert the two screws that hold the door in place.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Steven from Citrus Heights, CA
    • Parts Used:
      131553900
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Screw drivers
    Dryer was making a high pitch squeal (replaced drum bearing,belt and heating element)
    On the back of the dryer there is an inspection cover, remove it and you can get to the belt. release tension and remove the belt (Very easy to do, no tools required). Two screws hold the top in place, remove, slide top back and set to side. There are two screws and four clips holding the front on remove the screws and pop the clips loose, unplug wiring harness and remove front. Remove plastic guide that is in front of the drum, pop drum up and out of bracket holding the back, slide drum out the front. Now you have access to the heating element and the rear drum bearing. unplug the wires to the heating element (there are two small retention tabs on the clips that need to be straightened so you can remove the wires) once you do that the rest is easy, just remove the screws and remove & replace unit. Reassemble in the reverse order. There is a good video online that you can follow prior to starting this project.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      claudia from mashpee, MA
    • Parts Used:
      131553900
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    Heating element went snap crackle and pop after bearing lube job
    Watched several videos about taking the dryer apart and replacing the element and then decided to order the part from this site. Within a few days the part arrived. By then I was practiced at taking the dryer apart, so the actual repair was simple -- easier than lubricating the bearing.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX418120
      Manufacturer Part Number: 131553900
      Brand
      Model Number
      Description
      Frigidaire
      41749012890
      Dryer - Residential, Electric
      Frigidaire
      41749022890
      Dryer - Residential, Electric
      Kenmore
      41764182300
      Dryer
      Kenmore
      41769042990
      Dryer
      Kenmore
      41769042991
      Dryer
      Kenmore
      41769052990
      Dryer
      Kenmore
      41769052991
      Dryer
      Kenmore
      41780032990
      Dryer
      Kenmore
      41780042990
      Dryer
      Kenmore
      41780042991
      Dryer
      Kenmore
      4178005291
      Dryer - Kenmore Dryer Model 417.8005291 (4178005291, 417 8005291) Parts
      Kenmore
      41780052990
      Dryer
      Kenmore
      41780052991
      Dryer
      Kenmore
      41780142000
      Dryer
      Kenmore
      41780412700
      Dryer
      Kenmore
      41781042000
      Dryer
      Kenmore
      41781042001
      Dryer
      Kenmore
      41781052000
      Dryer
      Kenmore
      41781052001
      Dryer
      Kenmore
      41781142000
      Dryer
      Kenmore
      41781142001
      Dryer
      Kenmore
      41782042100
      Dryer
      Kenmore
      41782042101
      Dryer
      Kenmore
      41782042102
      Dryer
      Kenmore
      41782052100
      Dryer
      Kenmore
      41782052101
      Dryer
      Kenmore
      41782052102
      Dryer
      Kenmore
      41782052103
      Dryer
      Kenmore
      41782142100
      Dryer
      Kenmore
      41782142101
      Dryer