OEM Amana Dryer Drum Glide [WP37001298] | Ships Today | Fix.com
Drum Glide – Part Number: WP37001298
Drum Glide – Part Number: WP37001298 Drum Glide – Part Number: WP37001298 https://fixcom.azureedge.net/Schematics/Maytag/58910.gif

Drum Glide

Your Price
$7.87

Fix Number: FIX11741931

Manufacturer #: WP37001298

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

If your dryer is noisy, will not tumble, or is leaving marks on your clothes, you may need to replace the drum glide. The drum glide is installed on the front bulkhead either at the top or the bottom, regardless of the brand of dryer. To gain access to the drum glide, you will have to open the cabinet on the dryer. This drum glide is sold individually but it is important to note that they should be replaced in pairs. Before beginning this repair, it is important to disconnect the dryer from the power source. The tools required for this repair are a putty knife and a 5/16 nut driver.

Works with the following brands

Amana, Maytag, Speed Queen, Crosley, Magic Chef, Admiral

Works with the following products

Dryer

Fixes the following symptoms

Noisy | Will not tumble | Marks left on clothes

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 16 reviews
>
<
Customer:
Rachel from Berrien Center, MI
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Drum was not working properly
It was very easy to installed new parts.
9 of 9 people found these instructions helpful

Were these instructions helpful?   

Customer:
Scott from Beaumont, TX
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set, Wrench set
High-pitched squeak during first 2-3 minutes of drying
I knew right away that some rollers were bad. So, I decided to do a total "rebuild" while I had the dryer apart. I.e., any part pertaining to movement of the drum. So, I replaced the 2 rear rollers, idler pulley, front glides and drum drive belt. Why not? You're already in there - just do it all, and you're good for maybe another 10 years. One thing they don't tell you in the videos, but you really should do; add some grease to the shafts for the rear rollers and on the shoulder bolt that holds the idler pulley in place. Don't "slather" it in there; I used a wooden toothpick to put a small amount for the roller shafts and shoulder bolt. It's best to use something that can stand high heat. I used STL Pipe Thread grease; but any good, high-heat grease will do. Also, take the time to vacuum out the inside of the dryer, and ALL air paths. Especially the front Lint Duct Assembly. Mine was so full of lint, it was almost blocking the blower wheel. It was so packed, it was mostly blocking the thermal limit switch!!. That could cause the dryer to over heat, and catch all that lint on fire. Clean it good, and it'll take less running time to dry your clothes. I could tell the difference.
3 of 4 people found these instructions helpful

Were these instructions helpful?   

Customer:
Daniel from Manchester, NH
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Very noisy when turning
Idler Lever was obviously totally gone and causing most of the noise. Videos are excellent. Just follow them carefully.
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Gerald from LaPorte, IN
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers, Wrench set
Building noise as unit heated up .
After replacing everything but the Fan , I replaced it ! How did I find out? I run the unit with the Gas valve unhooked . The heat was Warping the Fan throwing it out of balance ..Thats why as it got Hot the noise got louder . Replacing the fan salved the problem . That was my sons Dryer . Well I have one just like it at the same age . I've got all of the spare parts to fix it , motor included !
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Joseph from Tucson, AZ
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Noisy dryer from an obvious part(s) failure.
Removed eight ?" screws (8A X 3/8 Hex Washer Head Tapping) starting with two at bottom kick panel, then two at dryer door panel; disconnect electrical connectors to release door panel from dryer body; remove four screws from dryer opening bulkhead to expose drum and blower impeller; remove two screws securing top dryer panel to side panels; reach inside right lower access to release dryer belt from idler wheel; lift top panel a little while pulling out bulky drum. Vacuum the heck out of the inside. Even better, do all this outside and take compressed air to the inside. Because this dryer was 19 years old, all three rollers (drum, idler wheel), guides (2), felts(2), and belt were replaced. The noise was caused by seized rollers but all rubber on rollers and belt was cracking, so best to change such old worn out parts. Don't forget to lube all shafts with oil (plumbers silicone best), then reassemble...js
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Larry from Ocala, FL
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Noise
Best thing was to tape belt in place on the drum prior to putting back in place, after belt pulley was connected tape was removed. Much easier than trying to install the belt after drum installed.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Michael from Meno Falls, WI
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Noisy dryer
followed yor videos ,they were perfect ,thank you
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
reginald from mount holly, NJ
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set
Noisy when operating
followed instructions in vidios for belt and idler pulley and tub support rollers model in vidios different but came apart basicly the same way. dryer is 17 yrs old, glad to find parts runs quiet as new idler pulley and shaft not worn replaced anyway only belt and left hand tub support roller and shaft were worn
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jake from Eureka, NV
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable)
Noisy dryer and slipping belt
No problems. Only the idler pulley seemed to be the issue but since I had the dryer disassembled and all of the parts, I replaced them all so I don't have to do it again any time soon. Watched all the installation videos before tearing into it - they were very helpful and I didn't have to deviate at all from their instruction.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Steve from Kaplan, LA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Dryer was squeaking when initially turned on.
I really think the squeak was coming from the idler pulley, however due to the age of the dryer (10 + years) I decided to change the belt, front drum glides and rear drum rollers as well. The videos were very helpfull. The whole thing took about two hours, but I had to remove a folding door and pull the unit out of the small utility room to work on it. Actual work time on dryer was about 1 hour including vacuuming the lint and dust from inside. In the end the dryer is quiet and works like new. This site made things easy and the parts arrived quickly. Very happy with the whole experience.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
david from bull shoals, AR
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Dryer squeaks
I followed the instructions per the online video. It was pretty straightforward in how to's such as: getting access, removing drum, and then replacing the drum rollers, drum glides and belt. One suggestion I have is to offer an option to purchase the Teflon washers and metal washers which are necessary part of the drum roller assembly. These washers were not provided, but had it been offered as an option I would have gladly paid extra. I live in a remote area, and there is nothing local when it comes to purchasing any parts. All in all it was a positive experience.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jason from Carol Stream, IL
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Dryer was making a squeaking noise
I replaced the drum rollers, belt, idler pulley wheel and lever. Took about an hour, easy to install as the site has step by step videos. Price was very reasonable and delivery in 2 days! Saved money by doing it myself. i would highly recommend this site to everyone!!!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
gary from worth, IL
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Noise while running
r&r front and drum. glue in new seal. watching video really helped.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Gerry from Gasport, NY
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Wrench (Adjustable)
Replaced idle lever
Fairly easy except for when i did the drum roller i needed s specizl clamp removal tool that they did not tell me was required untill Steve removed that clamp. I had to leave that and get tool and replace it later.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Christian from La marque, TX
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Horrible noise
According to the video I did the repairs except for the felt seal because I dismdnt buy the glue needed. Unfortunately It did not fix the problem.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

>
<

Model Cross Reference

This part works with the following models:

Fix Number: FIX11741931
Manufacturer Part Number: WP37001298
Brand
Model Number
Description
Admiral
ADE7005AKW
Dryer - Residential
Admiral
ADE7005AYW
Dryer - Residential
Admiral
ADE9005AGW
Dryer - Residential
Admiral
ADG7005AWW
Dryer - Residential
Speed Queen
AEM197
Dryer - Residential, Automatic
Speed Queen
AEM377
Dryer - Residential, Automatic
Speed Queen
AEM397
Dryer - Residential, Automatic
Speed Queen
AEM407L
Dryer - Residential, Automatic
Amana
AEM407L2
Dryer
Speed Queen
AEM407L2-PAEM402L2
Dryer - Speed Queen Dryer Model AEM407L2-PAEM402L2 (AEM407L2PAEM402L2, AEM407L2 PAEM402L2) Parts
Speed Queen
AEM407W
Dryer - Residential, Automatic
Amana
AEM407W2
Dryer
Speed Queen
AEM407W2-PAEM402W2
Dryer - Speed Queen Dryer Model AEM407W2-PAEM402W2 (AEM407W2PAEM402W2, AEM407W2 PAEM402W2) Parts
Amana
AEM427L2
Dryer
Speed Queen
AEM427L2-PAEM427L2
Dryer - Speed Queen Dryer Model AEM427L2-PAEM427L2 (AEM427L2PAEM427L2, AEM427L2 PAEM427L2) Parts
Speed Queen
AEM427W
Dryer - Residential, Automatic
Amana
AEM427W2
Dryer
Speed Queen
AEM427W2-PAEM427W2
Dryer - Speed Queen Dryer Model AEM427W2-PAEM427W2 (AEM427W2PAEM427W2, AEM427W2 PAEM427W2) Parts
Amana
AEM477L2
Dryer
Speed Queen
AEM477L2-PAEM477L2
Dryer - Speed Queen Dryer Model AEM477L2-PAEM477L2 (AEM477L2PAEM477L2, AEM477L2 PAEM477L2) Parts
Speed Queen
AEM477W
Dryer - Residential, Automatic
Amana
AEM477W2
Dryer
Speed Queen
AEM477W2-PAEM477W2
Dryer - Speed Queen Dryer Model AEM477W2-PAEM477W2 (AEM477W2PAEM477W2, AEM477W2 PAEM477W2) Parts
Speed Queen
AEM497L
Dryer - Residential, Automatic
Amana
AEM497L2
Dryer
Speed Queen
AEM497L2-PAEM497L2
Dryer - Speed Queen Dryer Model AEM497L2-PAEM497L2 (AEM497L2PAEM497L2, AEM497L2 PAEM497L2) Parts
Speed Queen
AEM497W
Dryer - Residential, Automatic
Amana
AEM497W2
Dryer
Speed Queen
AEM497W2-PAEM497W2
Dryer - Speed Queen Dryer Model AEM497W2-PAEM497W2 (AEM497W2PAEM497W2, AEM497W2 PAEM497W2) Parts
Speed Queen
AEM677L2
Dryer