10153517-1-M-Makita-650583-6-Switch
Part Location Diagram of 650583-6 Makita Switch
See part 6 in the diagram
10153517-1-S-Makita-650583-6-Switch 360 view
( Grid squares measure 1x1 inch )
10153517-1-S-Makita-650583-6-Switch 10153517-2-S-Makita-650583-6-Switch 10153517-3-S-Makita-650583-6-Switch 10153517-1-S-Makita-650583-6-Switch 360 view
Part Location Diagram of 650583-6 Makita Switch

Switch 650583-6

$ 39.46
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10153517
Manufacturer #:
650583-6
Manufactured by:
Makita

Product Description

This is a Genuine OEM Approved replacement part used on Makita Drills/Drivers. This switch has a Plastic Body and it has Lead Wires attached. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing

  • Works with the following brands:
    Makita
  • Works with the following products:
    Drill