Brush Holder 638614-1

This is an Authentic Manufacturer Sourced replacement part used on a Makita Drills/Drivers. This part consists of: Plastic Holder Ring, Two (2) Metal Brush Holders With Springs and Two (2) Lead Wires Attached. This part holds Carbon Brushes around the Armature to provide stable and safe contact. Please note Carbon Brushes are Sold Separately. To replace this assembly you would need a Screwdriver and Pliers. • First remove Screws holding the cover together. • Carefully remove Two (2) Halves of the housing to gain access to Armature and Brush Holder. • Remove the screws holding Brush Holder to The Trigger. • Remove the Armature Assembly and the Brush Holder. • Install the New Brush Holder, Brushes and the Armature • Reassemble and test your tool.