10318436-1-M-Delta-1343778-Switch Box
Part Location Diagram of 1343778 Delta Switch Box
See part 36 in the diagram
( Grid squares measure 1x1 inch )
10318436-1-S-Delta-1343778-Switch Box Part Location Diagram of 1343778 Delta Switch Box

Switch Box 1343778

$ 10.88
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10318436
Manufacturer #:
1343778
Manufactured by:
Delta

Product Description

This is a genuine OEM sourced replacement switch box designed for use with drill presses. It is sourced from original manufacturer. It helps to protect the house and secure the switch to the unit. This switch box is made out of black plastic and it is sold individually. Please note the switch and the hardware are sold separately. To complete this repair you will need a screwdriver. • Make sure unit is unplugged • First you want to remove the two screws that are holding the switch plate • Disconnect the wires on the back of the switch • This will allow you to remove the switch plate • Remove the wires out of the old switch box and removing it • Then you want to secure the new switch box in place • Attach switch box with the 2 screws • Reconnect the wires to the switch • Secure the switch plate • Plug in the tool and test it

  • Works with the following brands:
    Delta, Black and Decker
  • Works with the following products:
    Drill Press