Sorry, this part is No Longer Available at Fix.com, which means:
Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:
Stiff movement, poor bit grip, or a seized chuck can make a drill press difficult or unsafe to use. This replacement chuck and key assembly holds drill bits firmly while the spindle turns. Check for dirty jaws, an incorrect key, bent bits, spindle runout, and worn bearings before deciding the chuck has failed. Match the replacement to the full tool model and type because similar-looking chucks may use different mounting systems. Disconnect electrical power before service. Use the correct removal tool, protect the chuck from falling, and clean the spindle and chuck socket thoroughly. Do not oil the mating surfaces. After installation, check bit alignment and operation at low speed.
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
