10238844-1-M-Craftsman-STD304300-Belt
Part Location Diagram of STD304300 Craftsman Belt
See part A-38 in the diagram
( Grid squares measure 1x1 inch )
10238844-1-S-Craftsman-STD304300-Belt Part Location Diagram of STD304300 Craftsman Belt

Belt STD304300

$ 5.20
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10238844
Manufacturer #:
STD304300
Manufactured by:
Craftsman

Product Description

This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman joiners and band saws. The belt connects the motor pulley to the table saw pulley. This part is made of rubber and is sold individually. Be sure to disconnect the power before installing this part. The position of the belt will depend on which speed you would like. For installation, place the belt on one pulley and slowly stretch the belt while rotating the opposite pulley to fit into place.

  • Works with the following brands:
    Craftsman
  • Works with the following products:
    Drill Press, Band Saw